Bartlett, C. S. (1986). An Analytical Study of Icing Similitude for Aircraft Engine Icing (Report No. DOT/FAA/CT-86/35, AEDC-TR-86-26). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://rosap.ntl.bts.gov/view/dot/92814
Bartlett, C. Scott. An Analytical Study of Icing Similitude for Aircraft Engine Icing. Report no. DOT/FAA/CT-86/35, AEDC-TR-86-26. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1986. https://rosap.ntl.bts.gov/view/dot/92814.
Bartlett, C. Scott An Analytical Study of Icing Similitude for Aircraft Engine Icing. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1986, Report no. DOT/FAA/CT-86/35, AEDC-TR-86-26, ROSA P. https://rosap.ntl.bts.gov/view/dot/92814.
An analytical study was conducted of the requirements for achieving similitude for icing as test conditions were varied. The application is aimed at engine icing tests conducted in ground spray rig facilities. The analysis considers the changes in the icing test conditions, including static temperature, static pressure, liquid water content, droplet size, and flow velocity, that are required to achieve similitude if any of the conditions are changed. The analysis uses a math model of icing scaling which has been validated by experimental data collected at the AEDC icing research tunnel. The requirements for similitude were analyzed for changes in both temperature and pressure. Expressions to describe the influence of test condition changes on the value of the scaling parameter were developed. The effect of icing caused by free-stream static temperature changes and temperature rise through a generic high-bypass turbofan engine was studied. The icing test points listed for compliance testing for aircraft icing certification under guidelines given in the Federal Aviation Administration Advisory Circular (AC) 20-73 were used as test points for the analyses.
Bartlett, C. S. (1986). An Analytical Study of Icing Similitude for Aircraft Engine Icing (Report No. DOT/FAA/CT-86/35, AEDC-TR-86-26). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://rosap.ntl.bts.gov/view/dot/92814
Bartlett, C. Scott. An Analytical Study of Icing Similitude for Aircraft Engine Icing. Report no. DOT/FAA/CT-86/35, AEDC-TR-86-26. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1986. https://rosap.ntl.bts.gov/view/dot/92814.
Bartlett, C. Scott An Analytical Study of Icing Similitude for Aircraft Engine Icing. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1986, Report no. DOT/FAA/CT-86/35, AEDC-TR-86-26, ROSA P. https://rosap.ntl.bts.gov/view/dot/92814.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.