Stamatiadis, N., Graves, R. C., & Schmidt, J. D. (1995). Best Practices for Commercial Vehicle Monitoring Facilities Design (Report No. FHWA-SA-96-001). United States. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/42578
Stamatiadis, Nikiforos, R. C. Graves, and Jennifer D. Schmidt. Best Practices for Commercial Vehicle Monitoring Facilities Design. Report no. FHWA-SA-96-001. United States. Federal Highway Administration, 1995. https://rosap.ntl.bts.gov/view/dot/42578.
Stamatiadis, Nikiforos, et al. Best Practices for Commercial Vehicle Monitoring Facilities Design. United States. Federal Highway Administration, 1995, Report no. FHWA-SA-96-001, ROSA P. https://rosap.ntl.bts.gov/view/dot/42578.
The great technological advances that were made over the last decade in monitoring traffic and the increased emphasis on highway safety for truck traffic have prompted a need to determine more effective ways to monitor and inspect truck traffic. Commercial Vehicle Monitoring (CVM) facilities provide the highway community with the means of supervising truck traffic. However, in an era with limited funds and space for roadway expansion, some consideration must be given to the types of facilities needed and the most efficient way to spend the available funds. Hence, a research study was initiated to determine the successful practices for designing a new CVM facility or retrofitting or upgrading an existing facility; the findings are presented in this report. A questionnaire was distributed to all 50 states to identify the state of the nation with respect to the newly constructed and lately upgraded CVM facilities. This report focuses on the presentation of issues that need to be considered and addressed when designing or upgrading a CVM facility and provides a checklist of critical factors, considerations for facility components, and typical facility layouts.
Stamatiadis, N., Graves, R. C., & Schmidt, J. D. (1995). Best Practices for Commercial Vehicle Monitoring Facilities Design (Report No. FHWA-SA-96-001). United States. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/42578
Stamatiadis, Nikiforos, R. C. Graves, and Jennifer D. Schmidt. Best Practices for Commercial Vehicle Monitoring Facilities Design. Report no. FHWA-SA-96-001. United States. Federal Highway Administration, 1995. https://rosap.ntl.bts.gov/view/dot/42578.
Stamatiadis, Nikiforos, et al. Best Practices for Commercial Vehicle Monitoring Facilities Design. United States. Federal Highway Administration, 1995, Report no. FHWA-SA-96-001, ROSA P. https://rosap.ntl.bts.gov/view/dot/42578.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.