Mak, K. K., & Menges, W. L. (1997). NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier (Report No. FHWA-RD-96-201). United States. Federal Highway Administration. Office of Research and Development. https://rosap.ntl.bts.gov/view/dot/41416
Mak, King K. and Wanda L. Menges. NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier. Report no. FHWA-RD-96-201. United States. Federal Highway Administration. Office of Research and Development, 1997. https://rosap.ntl.bts.gov/view/dot/41416.
Mak, King K., and Wanda L. Menges NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier. United States. Federal Highway Administration. Office of Research and Development, 1997, Report no. FHWA-RD-96-201, ROSA P. https://rosap.ntl.bts.gov/view/dot/41416.
The New Jersey safety shaped barrier is one of the most common barriers currently in use on the Nation's highways. The barrier has successfully met all evaluation criteria set forth in National Cooperative Highway Research Program (NCHRP) Report 230. However, with the adoption of NCHRP Report 350 by the Federal Highway Administration (FHWA) as the official guidelines for crash testing of roadside safety features, it became necessary to reevaluate the New Jersey safety shaped barrier to the new guidelines. Of particular importance is the replacement of one of the design test vehicles specified in NCHRP Report 230, the 2044-kg passenger car, by a 2000-kg pickup truck (2000P) under NCHRP Report 350 guidelines. The crash test reported herein was performed as an effort to evaluate the New Jersey safety shaped barrier according to NCHRP Report 350 guidelines. The crash test performed corresponded to NCHRP Report 350 test designation 3-11 involving a 2000P test vehicle impacting the barrier at a nominal speed and angle of 100 km/h and 25 degrees. The New Jersey safety shaped barrier met all evaluation criteria set forth in NCHRP Report 350 and the test was judged to be satisfactory.
Mak, K. K., & Menges, W. L. (1997). NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier (Report No. FHWA-RD-96-201). United States. Federal Highway Administration. Office of Research and Development. https://rosap.ntl.bts.gov/view/dot/41416
Mak, King K. and Wanda L. Menges. NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier. Report no. FHWA-RD-96-201. United States. Federal Highway Administration. Office of Research and Development, 1997. https://rosap.ntl.bts.gov/view/dot/41416.
Mak, King K., and Wanda L. Menges NCHRP Report 350 Compliance Test of the New Jersey Safety Shaped Barrier. United States. Federal Highway Administration. Office of Research and Development, 1997, Report no. FHWA-RD-96-201, ROSA P. https://rosap.ntl.bts.gov/view/dot/41416.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.