Mitchell, C. A., & MaName, Z. J. (2015). Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail). https://rosap.ntl.bts.gov/view/dot/30855
Mitchell, Cody Aaron and Z. John MaName. Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail), 2015. https://rosap.ntl.bts.gov/view/dot/30855.
Mitchell, Cody Aaron, and Z. John MaName Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail), 2015, ROSA P. https://rosap.ntl.bts.gov/view/dot/30855.
The goal of this work is to design and construct a full scale lateral impact testing facility that is capable of recreating the damage that would be created by an overheight vehicle collision. This was accomplished by impacting a test specimen with 8000 lbs. impact cart. The impact cart is raised on an elevated track and allowed to roll down the track with a change in height of 10 ft. This change in height is what provides the impact force necessary to recreate an overheight vehicle collision. The track is constructed out of wood and is designed to withstand both the gravity and lateral loads that the impact cart will cause. The impact cart consists of a concrete block surrounded in plate steel on a cart frame. The cart itself was designed to withstand multiple impacts so that it can be used for more than a single test. The supported system for the test specimen consists of gravity supports and lateral supports. The lateral support, or backstop, prevents the test specimen from sliding during testing and simulates the boundary conditions that would occur during an overheight vehicle collision. The facility must be capable of testing a variety of specimens in order to fully utilize the potential of such a facility.
Mitchell, C. A., & MaName, Z. J. (2015). Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail). https://rosap.ntl.bts.gov/view/dot/30855
Mitchell, Cody Aaron and Z. John MaName. Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail), 2015. https://rosap.ntl.bts.gov/view/dot/30855.
Mitchell, Cody Aaron, and Z. John MaName Design and Construction of a Full-Scale Lateral Impact Testing Facility. National University Rail Center (NURail), 2015, ROSA P. https://rosap.ntl.bts.gov/view/dot/30855.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.