Tang, F., Chen, G., Volz, J. S., Brow, R. K., & Koenigstein, M. (2012). Mechanical Characterization of Enamel Coated Steel Bars (Report No. NUTC R208). Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety. https://rosap.ntl.bts.gov/view/dot/27909
Tang, Fujian, Genda Chen, Jeffery S. Volz, Richard K. Brow, and Michael Koenigstein. Mechanical Characterization of Enamel Coated Steel Bars. Report no. NUTC R208. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2012. https://rosap.ntl.bts.gov/view/dot/27909.
Tang, Fujian, et al. Mechanical Characterization of Enamel Coated Steel Bars. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2012, Report no. NUTC R208, ROSA P. https://rosap.ntl.bts.gov/view/dot/27909.
In this study, the corrosion process of enamel-coated deformed rebar completely immersed in 3.5 wt.% NaCl solution was evaluated over a period of 84 days by EIS testing. Three types of enamel coating were investigated: pure enamel, 50/50 enamel coating, and double enamel. Surface condition of the enamel coatings that were intentionally damaged prior to corrosion tests was visually examined at different immersion times. After 84 days of testing, the damaged coating areas were characterized by SEM, and the corrosion products on and adjacent to the damaged areas were collected and analyzed by XRD. Corrosion initiated at the damaged locations with no undercutting of the coating observed. The 50/50 enamel coating had the least corrosion resistance, due to its interconnected pore structure, and prior damage drastically reduced the corrosion resistance of pure and double enamel coated rebar.
Tang, F., Chen, G., Volz, J. S., Brow, R. K., & Koenigstein, M. (2012). Mechanical Characterization of Enamel Coated Steel Bars (Report No. NUTC R208). Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety. https://rosap.ntl.bts.gov/view/dot/27909
Tang, Fujian, Genda Chen, Jeffery S. Volz, Richard K. Brow, and Michael Koenigstein. Mechanical Characterization of Enamel Coated Steel Bars. Report no. NUTC R208. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2012. https://rosap.ntl.bts.gov/view/dot/27909.
Tang, Fujian, et al. Mechanical Characterization of Enamel Coated Steel Bars. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2012, Report no. NUTC R208, ROSA P. https://rosap.ntl.bts.gov/view/dot/27909.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.