Hall, K. D., & Bettis, J. W. (2000). Development of Comprehensive Low-Volume Pavement Design Procedures (Report No. MBTC FR-1070). Arkansas. State Highway & Transportation Department. https://rosap.ntl.bts.gov/view/dot/14160
Hall, Kevin D. and John W. Bettis. Development of Comprehensive Low-Volume Pavement Design Procedures. Report no. MBTC FR-1070. Arkansas. State Highway & Transportation Department, 2000. https://rosap.ntl.bts.gov/view/dot/14160.
Hall, Kevin D., and John W. Bettis Development of Comprehensive Low-Volume Pavement Design Procedures. Arkansas. State Highway & Transportation Department, 2000, Report no. MBTC FR-1070, ROSA P. https://rosap.ntl.bts.gov/view/dot/14160.
Historically, "low-volume" pavements (less than 500 ADT) in Arkansas were typically constructed using a "standard" section, i.e. a double surface treatment over a specified thickness of granular base. Subsequent analysis indicated these sections were structurally inadequate in many cases. In response, the Arkansas State Highway and Transportation Department (AHTD) moved to designing low-volume pavements by normal methods, such as the AASHTO Guide for the Design of Pavement Structures. Other state highway agencies have developed or adopted other design methods for lower-volume pavements. In many cases, "normal" design methods often provide substantial, and perhaps unwarranted, structural sections for low-volume pavements, resulting in fewer miles of low-volume pavements constructed annually. This project compiled efforts by pavement agencies to develop specific low-volume design methods, and suggests potential method(s) for designing low-volume pavements for a variety of traffic, materials, soils, and environmental conditions in Arkansas. The recommendations provide a framework for developing a low-volume design method. This document is also available in HTML at http://www.mackblackwell.org/research/finals/arc1070/framereport1070.html
Hall, K. D., & Bettis, J. W. (2000). Development of Comprehensive Low-Volume Pavement Design Procedures (Report No. MBTC FR-1070). Arkansas. State Highway & Transportation Department. https://rosap.ntl.bts.gov/view/dot/14160
Hall, Kevin D. and John W. Bettis. Development of Comprehensive Low-Volume Pavement Design Procedures. Report no. MBTC FR-1070. Arkansas. State Highway & Transportation Department, 2000. https://rosap.ntl.bts.gov/view/dot/14160.
Hall, Kevin D., and John W. Bettis Development of Comprehensive Low-Volume Pavement Design Procedures. Arkansas. State Highway & Transportation Department, 2000, Report no. MBTC FR-1070, ROSA P. https://rosap.ntl.bts.gov/view/dot/14160.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.