Bruner, R. F., Coyle, H. M., & Bartoskewitz, R. E. (1983). Cantilever Retaining Wall Design (Report No. FHWA/TX-83725+236-2F). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/84791
Bruner, Robert F., Harry M. Coyle, and Richard E. Bartoskewitz. Cantilever Retaining Wall Design. Report no. FHWA/TX-83725+236-2F. Texas Transportation Institute. Texas A&M University, 1983. https://rosap.ntl.bts.gov/view/dot/84791.
Bruner, Robert F., et al. Cantilever Retaining Wall Design. Texas Transportation Institute. Texas A&M University, 1983, Report no. FHWA/TX-83725+236-2F, ROSA P. https://rosap.ntl.bts.gov/view/dot/84791.
Current retaining wall design procedures are summarized with emphasis on the prediction of lateral earth pressures using the Coulomb and Rankine earth pressure theories, and the equivalent fluid pressure method. Results from previous large scale retaining wall tests and field studies are presented. Different design aspects are introduced as background for a recent field performance study. Instrumentation for measuring earth pressures on bearing surfaces and movement of a test wall constructed on a Texas State Department of Highways and Public Transportation (TSDHPT) project is described. Measured pressures and movements along with results of geotechnical tests of the foundation and backfill soils are presented in detail. The test wall design based on the District 12 TSDHPT design standard is outlined and compared with results from the field performance study. A proposed new design procedure is developed based on modification of current design procedures. Significant modifications were made in the areas of the use of cohesive soil in the backfill, the computation of lateral earth pressures, and the computation of stability against overturning.
Bruner, R. F., Coyle, H. M., & Bartoskewitz, R. E. (1983). Cantilever Retaining Wall Design (Report No. FHWA/TX-83725+236-2F). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/84791
Bruner, Robert F., Harry M. Coyle, and Richard E. Bartoskewitz. Cantilever Retaining Wall Design. Report no. FHWA/TX-83725+236-2F. Texas Transportation Institute. Texas A&M University, 1983. https://rosap.ntl.bts.gov/view/dot/84791.
Bruner, Robert F., et al. Cantilever Retaining Wall Design. Texas Transportation Institute. Texas A&M University, 1983, Report no. FHWA/TX-83725+236-2F, ROSA P. https://rosap.ntl.bts.gov/view/dot/84791.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.