Stein, E. S. (1989). Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards (Report No. DOT/FAA/CT-TN89/50). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://rosap.ntl.bts.gov/view/dot/71629
Stein, Earl S.. Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards. Report no. DOT/FAA/CT-TN89/50. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1989. https://rosap.ntl.bts.gov/view/dot/71629.
Stein, Earl S. Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1989, Report no. DOT/FAA/CT-TN89/50, ROSA P. https://rosap.ntl.bts.gov/view/dot/71629.
This report describes a small sample study of the possible impact of altering the separation minimum between aircraft approaches to dependent parallel runways. The current standard is 2 nautical miles (nmi) and the proposed new standard is 1.5 nmi. Four full performance level air traffic controllers participated in 12 hours of simulated air traffic control activity in which separation standards were altered in a balanced fashioned after each 1 hour block of simulation. Data were collected on multiple airspace and operator performance variables. Also collected were workload and observer estimates. The goal was to determine if system performance could be improved without compromising safety. Results indicated an increased frequency of landings using the 1.5 nmi standard indicating a finite increase in airport capacity. There were no indications of reduced safety or increased operator workload. since the data were generated based on a small sample, results should be considered indicative rather than conclusive.
Stein, E. S. (1989). Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards (Report No. DOT/FAA/CT-TN89/50). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://rosap.ntl.bts.gov/view/dot/71629
Stein, Earl S.. Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards. Report no. DOT/FAA/CT-TN89/50. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1989. https://rosap.ntl.bts.gov/view/dot/71629.
Stein, Earl S. Parallel Approach Separation and Controller Performance: A Study of the Impact of Two Separation Standards. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 1989, Report no. DOT/FAA/CT-TN89/50, ROSA P. https://rosap.ntl.bts.gov/view/dot/71629.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.