Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All
FAA Technical Library FAA Technical Library
FAA Technical Library

Technical reports, Tech Notes, and articles that document the FAA’s applied research, engineering, testing and evaluation, and resulting scientific solutions addressing current and future air transportation challenges in collaboration with industry, academia, and other government partners. For more content, visit the FAA Technical Library https://www.faa.gov/about/office_org/headquarters_offices/ang/library/. Bookmark this collection:https://rosap.ntl.bts.gov/collection_faa_tl

Narrow Results:
Resource Type
More
Keywords
More
1 - 20 of 304 Results
Refine Results
All Collections
Small Close Icon
Refine Results:
All Collections
Small Close Icon
    Minimizing Risk of Bird Strike to Rotorcraft
    Cite
    Filetype[PDF - 3.02 MB]
    :
    Ronning, Donald J
    2021-11-03
    Abstract:
    This research presents a set of investigation results of a prototype (PAR46 size) landing light that incorporated ultraviolet light emitting diodes (U...
    File Type:
    Filetype[PDF - 3.02 MB]
    File Type:
    Filetype[PDF - 3.02 MB]
    Evaluation of Lithium Battery Thermal Runaway Propagation
    Cite
    Filetype[PDF - 1.12 MB]
    :
    Maloney, Thomas
    2022-01-01
    Abstract:
    Although the UN classifies lithium batteries as dangerous goods, current UN numbers for lithium batteries do not indicate what level of hazard each in...
    File Type:
    Filetype[PDF - 1.12 MB]
    File Type:
    Filetype[PDF - 1.12 MB]
    Obsolescence and Life Cycle Management for Avionics
    Cite
    Filetype[PDF - 1.35 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2015-11-01
    Abstract:
    This research identifies ways to identify and mitigate obsolescence risks in avionics and to provide related aviation safety input to the Federal Avia...
    File Type:
    Filetype[PDF - 1.35 MB]
    File Type:
    Filetype[PDF - 1.35 MB]
    Development of a Tabulated Material Model for Composite Material Failure, MAT213 Part 2: Experimental Tests to Characterize the Behavior and Properties of T800-F3900 Toray Composite
    Cite
    Filetype[PDF - 5.83 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2019-01-01
    Abstract:
    One of the challenges in building a predictive numerical model for composites is the ability to model accurately the behavior of the structure, especi...
    File Type:
    Filetype[PDF - 5.83 MB]
    File Type:
    Filetype[PDF - 5.83 MB]
    Guidelines to Minimize Manufacturing Induced Anomalies in Critical Rotating Parts - 2019 Revision
    Cite
    Filetype[PDF - 2.09 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2019-05-01
    Abstract:
    This report was developed by a partnership of the Aerospace Industries Association (AIA) Rotor Integrity Steering Committee (RISC) member company manu...
    File Type:
    Filetype[PDF - 2.09 MB]
    File Type:
    Filetype[PDF - 2.09 MB]
    Preliminary Integration Study on Incorporating Air Traffic Control Procedures in the Integrated Domain Assessment Model
    Cite
    Filetype[PDF - 2.01 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2017-10-01
    Abstract:
    The FAA Air Traffic Safety Oversight Service (AOV) initiated a research project, the Integrated Domain Assessment (IDA), to support its approval, acce...
    File Type:
    Filetype[PDF - 2.01 MB]
    File Type:
    Filetype[PDF - 2.01 MB]
    Post-Crash Fire Forensic Analysis on Aerospace Composites – Literature Review
    Cite
    Filetype[PDF - 6.06 MB]
    :
    Righi, Hajar ; Madabhushi, Abhijith ; ...
    2020-08-01
    Abstract:
    This report provides an initial literature review detailing the effects of fire on fiber-reinforced composites. This review summarizes the current sta...
    File Type:
    Filetype[PDF - 6.06 MB]
    File Type:
    Filetype[PDF - 6.06 MB]
    Mode I (GIC) Fracture Toughness of Composite Sandwich Structures for Use in Damage Tolerance Design and Analysis: Volume I: Static Testing including Effects of Fluid Ingression
    Cite
    Filetype[PDF - 46.98 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2017-09-01
    Abstract:
    This report, Volume I, contains results of Mode I static testing of composite sandwich structures. It is the first of a set of three volumes. The seco...
    File Type:
    Filetype[PDF - 46.98 MB]
    File Type:
    Filetype[PDF - 46.98 MB]
    Mode I (GIC) Fracture Toughness of Composite Sandwich Structures for Use in Damage Tolerance Design and Analysis: Volume II: Fatigue Testing, including Effects of Fluid Ingression
    Cite
    Filetype[PDF - 16.41 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2017-10-01
    Abstract:
    This report, Volume II, contains results of Mode I fatigue testing of composite sandwich structures. This report is the second of a set of three volum...
    File Type:
    Filetype[PDF - 16.41 MB]
    File Type:
    Filetype[PDF - 16.41 MB]
    Mode I (GIC) Fracture Toughness of Composite Sandwich Structures for Use in Damage Tolerance Design and Analysis: Volume III: Supplemental Static Testing
    Cite
    Filetype[PDF - 21.77 MB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2018-03-01
    Abstract:
    This report, Volume III in a set of three volumes, contains results of Mode I static testing of composite sandwich structures for sandwich variables n...
    File Type:
    Filetype[PDF - 21.77 MB]
    File Type:
    Filetype[PDF - 21.77 MB]
    Guidelines to Minimize Manufacturing Induced Anomalies in Critical Rotating Parts [2006]
    Cite
    Filetype[PDF - 484.37 KB]
    :
    United States. Department of Transportation. Federal Aviation Administration
    2006-02-01
    Abstract:
    This report was developed by a partnership of the Aerospace Industries Association (AIA) Rotor Manufacturing Project Team (RoMan) and the Federal Avia...
    File Type:
    Filetype[PDF - 484.37 KB]
    File Type:
    Filetype[PDF - 484.37 KB]
    Aluminum 2024-T351 Input Parameters for *MAT_224 in LS-DYNA Part4: Ballistic Impact Simulations of a Titanium 6Al-4V Generic Fan Blade Fragment on an Aluminum 2024 Panel Using *MAT_224 in LS-DYNA
    Cite
    Filetype[PDF - 4.52 MB]
    :
    Park, Chung-Kyu ; Carney, Kelly ; ...
    2021-09-01
    Abstract:
    As a part of the FAA’s Aircraft Catastrophic Failure Prevention Program, advanced material models have been developed to improve the numerical model...
    File Type:
    Filetype[PDF - 4.52 MB]
    File Type:
    Filetype[PDF - 4.52 MB]
    LS-DYNA® Water Ditching Simulation of a Fokker F28 Fellowship Aircraft
    Cite
    Filetype[PDF - 5.45 MB]
    :
    Jackson, Karen E ; Putnam, Jacob B ;
    2020-09-01
    Abstract:
    A finite element model of the Fokker F28 Fellowship aircraft, which was previously validated for structural impacts, was used to perform LS-DYNA simul...
    File Type:
    Filetype[PDF - 5.45 MB]
    File Type:
    Filetype[PDF - 5.45 MB]
    Aircraft Rescue and Firefighting Strategies and Tactical Considerations for New Large Aircraft: Update
    Cite
    Filetype[PDF - 8.93 MB]
    :
    Kreckie, Jack
    2020-09-01
    Abstract:
    The evolution of aircraft design and construction has brought about new challenges to Aircraft Rescue and Firefighting (ARFF) personnel. The New Large...
    File Type:
    Filetype[PDF - 8.93 MB]
    File Type:
    Filetype[PDF - 8.93 MB]
    Wildlife Strikes to Civil Aircraft in the United States, 1990–2019
    Cite
    Filetype[PDF - 3.35 MB]
    :
    Dolbeer, Richard A. ; Begier, Michael J. ; ...
    2021-02-01
    Abstract:
    Aircraft collisions with birds and other wildlife (wildlife strikes) have become a growing concern for aviation safety in recent years. Factors that c...
    File Type:
    Filetype[PDF - 3.35 MB]
    File Type:
    Filetype[PDF - 3.35 MB]
    Temperature Responses of Partially Restrained Airfield Rigid Pavement
    Cite
    Filetype[PDF - 3.18 MB]
    :
    Al-Qadi, Imad L ; Hernandez, J ;
    2021-09-01
    Abstract:
    Joint quality affects stresses and deflections, which result from gear and environmental loading, and, hence, short- and long-term performance of rigi...
    File Type:
    Filetype[PDF - 3.18 MB]
    File Type:
    Filetype[PDF - 3.18 MB]
    Pavement Data Analytics for Collected Sensor Data
    Cite
    Filetype[PDF - 6.14 MB]
    :
    Gungor, Osman Erman ; Al-Qadi, Imad L ; ...
    2021-10-01
    Abstract:
    The Federal Aviation Administration instrumented four concrete slabs of a taxiway at the John F. Kennedy International Airport to collect pavement res...
    File Type:
    Filetype[PDF - 6.14 MB]
    File Type:
    Filetype[PDF - 6.14 MB]
    Runway Incursion Mitigation Fiscal Year 2020 Annual Summary Report
    Cite
    Filetype[PDF - 871.60 KB]
    :
    Vitagliano, Lauren ; Debban, Steven ; ...
    2021-04-01
    Abstract:
    The Federal Aviation Administration (FAA) defines a runway incursion (RI) as “any occurrence at an aerodrome involving the incorrect presence of an ...
    File Type:
    Filetype[PDF - 871.60 KB]
    File Type:
    Filetype[PDF - 871.60 KB]
    Failure Mode and Effects Analysis on PEM Fuel Cell Systems for Aircraft Power Applications
    Cite
    Filetype[PDF - 5.36 MB]
    :
    Miller, Michael
    2019-02-01
    Abstract:
    The safety issues for use of a proton exchange membrane fuel cell (PEMFC) system providing onboard electrical power for a commercial aircraft has been...
    File Type:
    Filetype[PDF - 5.36 MB]
    File Type:
    Filetype[PDF - 5.36 MB]
    Development of a Tabulated Material Model for Composite Material Failure, MAT213: Part 1: Theory, Implementation, Verification & Validation
    Cite
    Filetype[PDF - 3.52 MB]
    :
    Hoffarth, Canio ; Khaled, Bilal ; ...
    2020-01-01
    Abstract:
    One of the challenges in building a predictive numerical model for composites is the ability to accurately model the behavior of the structure, especi...
    File Type:
    Filetype[PDF - 3.52 MB]
    File Type:
    Filetype[PDF - 3.52 MB]
1 - 20 / 304
Sort By:
Refine Results:
All Collections
Small Close Icon
Version 3.17.1