Dagger, R., Saftner, D., & Mayne, P. W. (2018). Cone Penetration Test Design Guide for State Geotechnical Engineers (Report No. MN/RC 2018-32). Minnesota. Department of Transportation. https://rosap.ntl.bts.gov/view/dot/64605
Dagger, Ryan, David Saftner, and Paul W. Mayne. Cone Penetration Test Design Guide for State Geotechnical Engineers. Report no. MN/RC 2018-32. Minnesota. Department of Transportation, 2018. https://rosap.ntl.bts.gov/view/dot/64605.
Dagger, Ryan, et al. Cone Penetration Test Design Guide for State Geotechnical Engineers. Minnesota. Department of Transportation, 2018, Report no. MN/RC 2018-32, ROSA P. https://rosap.ntl.bts.gov/view/dot/64605.
The objectives of this project are focused on a new cone penetration testing (CPT) geotechnical design manual for highway and transportation applications based on recent research and innovation covering the period from 2000 to 2018. A step-by-step procedure is outlined on how to use CPT data in the analysis and design of common geotechnical tasks. Previous manuals are either very outdated with information from 1970-1996, or not appropriately targeted to transportation works. This design document introduces modern and recent advancements in CPT research not otherwise captured in legacy manuals from the 1990’s and earlier. Examples and case studies are provided for each topic interpreted using CPT measures. In the manual, a step-by-step procedure is outlined on how to use CPT data in analysis and design for typical geotechnical practices. These topics, which are applicable both to state highways and local roads, include bridge foundations (including shallow footings and deep foundations) and soil characterization (including determination of standard soil engineering properties).
Dagger, R., Saftner, D., & Mayne, P. W. (2018). Cone Penetration Test Design Guide for State Geotechnical Engineers (Report No. MN/RC 2018-32). Minnesota. Department of Transportation. https://rosap.ntl.bts.gov/view/dot/64605
Dagger, Ryan, David Saftner, and Paul W. Mayne. Cone Penetration Test Design Guide for State Geotechnical Engineers. Report no. MN/RC 2018-32. Minnesota. Department of Transportation, 2018. https://rosap.ntl.bts.gov/view/dot/64605.
Dagger, Ryan, et al. Cone Penetration Test Design Guide for State Geotechnical Engineers. Minnesota. Department of Transportation, 2018, Report no. MN/RC 2018-32, ROSA P. https://rosap.ntl.bts.gov/view/dot/64605.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.