White, K., Sargand, S., & Al Rikabi, F. (2019). Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis (Report No. FHWA/OH-2020-1). Ohio. Department of Transportation. Office of Statewide Planning and Research. https://rosap.ntl.bts.gov/view/dot/61713
White, Kevin, Shad Sargand, and Fouad Al Rikabi. Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis. Report no. FHWA/OH-2020-1. Ohio. Department of Transportation. Office of Statewide Planning and Research, 2019. https://rosap.ntl.bts.gov/view/dot/61713.
White, Kevin, et al. Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis. Ohio. Department of Transportation. Office of Statewide Planning and Research, 2019, Report no. FHWA/OH-2020-1, ROSA P. https://rosap.ntl.bts.gov/view/dot/61713.
This study investigated asymmetric deformation (racking) of installed thermoplastic pipe. Ohio Department of Transportation (ODOT) construction records were reviewed to determine the extent of racking noted within Item 611 Conduit Evaluations. Next, a rational method for assessing racking was developed within the framework of the AASHTO LRFD Bridge Design Specifications, Section 12. A spreadsheet was developed to aid in the assessment procedure. The results of the methodology were compared to test cases analyzed using the 2D culvert specific finite element software CANDE. Finally, a one-day course covering the basics of the finite element method was developed and presented to ODOT staff.
White, K., Sargand, S., & Al Rikabi, F. (2019). Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis (Report No. FHWA/OH-2020-1). Ohio. Department of Transportation. Office of Statewide Planning and Research. https://rosap.ntl.bts.gov/view/dot/61713
White, Kevin, Shad Sargand, and Fouad Al Rikabi. Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis. Report no. FHWA/OH-2020-1. Ohio. Department of Transportation. Office of Statewide Planning and Research, 2019. https://rosap.ntl.bts.gov/view/dot/61713.
White, Kevin, et al. Division of Engineering Research on Call Services: Asymmetrical Deformation of Thermoplastic Pipe Analysis. Ohio. Department of Transportation. Office of Statewide Planning and Research, 2019, Report no. FHWA/OH-2020-1, ROSA P. https://rosap.ntl.bts.gov/view/dot/61713.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.