Ng, K. W., Ksaibati, K., & Brhanemeskel, M. A. (2019). Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming (Report No. MPC 19-380). Mountain-Plains Consortium. https://rosap.ntl.bts.gov/view/dot/42397
Ng, Kam W., Khaled Ksaibati, and Melake A Brhanemeskel. Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming. Report no. MPC 19-380. Mountain-Plains Consortium, 2019. https://rosap.ntl.bts.gov/view/dot/42397.
Ng, Kam W., et al. Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming. Mountain-Plains Consortium, 2019, Report no. MPC 19-380, ROSA P. https://rosap.ntl.bts.gov/view/dot/42397.
To facilitate the implementation of Mechanistic-Empirical Pavement Design Guide (MEPDG) in Wyoming, this research investigated the relationships between subgrade resilient modulus (Mr) and the dynamic cone penetration (DCP) and the standard penetration test (SPT) results, selected three best subgrade Mr predictive models based on Mr and distress estimations, and determined the sensitivity of design parameters on pavement distresses. To enhance the prediction of pavement performance distresses, 11 subgrade Mr predictive models were evaluated, and three best models were identified and selected. All pavement distresses were found to be sensitive to asphalt concrete thickness and most distresses were found to be non-sensitive to asphalt concrete (AC) grade, base thickness, and base Mr. Finally, pavement design comparisons were made between the WYDOT 2012 user design guide and the recommended design guide based on locally calibrated properties. The average overall cost per square yard of the pavement structure designed using the WYDOT 2012 user design guide was found to be 21% higher than that based on the recommended design guide.
Ng, K. W., Ksaibati, K., & Brhanemeskel, M. A. (2019). Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming (Report No. MPC 19-380). Mountain-Plains Consortium. https://rosap.ntl.bts.gov/view/dot/42397
Ng, Kam W., Khaled Ksaibati, and Melake A Brhanemeskel. Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming. Report no. MPC 19-380. Mountain-Plains Consortium, 2019. https://rosap.ntl.bts.gov/view/dot/42397.
Ng, Kam W., et al. Enhancement of Mechanistic-Empirical Pavement Design Guide for Roadway Design, and Construction in the State of Wyoming. Mountain-Plains Consortium, 2019, Report no. MPC 19-380, ROSA P. https://rosap.ntl.bts.gov/view/dot/42397.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.