Mathew, J., Benekohal, R. F., & Polavarapu, S. S. (2018). Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings] (Report No. NURail2013-UIUC-R07). National University Rail Center (NURail). https://rosap.ntl.bts.gov/view/dot/41691
Mathew, Jacob, Rahim F. Benekohal, and Sai Sravya Polavarapu. Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings]. Report no. NURail2013-UIUC-R07. National University Rail Center (NURail), 2018. https://rosap.ntl.bts.gov/view/dot/41691.
Mathew, Jacob, et al. Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings]. National University Rail Center (NURail), 2018, Report no. NURail2013-UIUC-R07, ROSA P. https://rosap.ntl.bts.gov/view/dot/41691.
The objective of this project is to define and quantify risk at highway rail grade crossings. Even though there are models available in the literature to predict the number of accidents at a crossing location this alone is not sufficient to quantify the risk at a location. This study defines the risk at a crossing by considering the number and severity of the accidents that occurred at the crossing. The risk at a railroad grade crossing should be calculated weighing in the severity of each accident at the crossing. This project evaluates the effectiveness of the U.S. Department of Transportation (USDOT) severity prediction formulas by comparing the number of fatal/injury accidents predicted by the formula to what is observed in the field. Furthermore, this study explores if any additional information about the crossing could be used to apply corrections to the formulas to improve the prediction capability of the severity equations. This approach was carried out on the accident dataset (between the years 2011 to 2015) and inventory dataset from Illinois. The corrections identified were also validated for generality on data from other States.
Mathew, J., Benekohal, R. F., & Polavarapu, S. S. (2018). Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings] (Report No. NURail2013-UIUC-R07). National University Rail Center (NURail). https://rosap.ntl.bts.gov/view/dot/41691
Mathew, Jacob, Rahim F. Benekohal, and Sai Sravya Polavarapu. Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings]. Report no. NURail2013-UIUC-R07. National University Rail Center (NURail), 2018. https://rosap.ntl.bts.gov/view/dot/41691.
Mathew, Jacob, et al. Railroad Grade Crossing Micro-Level Safety and Risk Analysis - Phase 2 [Evaluation of Safety Risk at Highway Rail Grade Crossings]. National University Rail Center (NURail), 2018, Report no. NURail2013-UIUC-R07, ROSA P. https://rosap.ntl.bts.gov/view/dot/41691.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.