Sutter, L. L. (2007). Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete (Report No. WHRP 07-05). Wisconsin Highway Research Program. https://rosap.ntl.bts.gov/view/dot/37804
Sutter, Lawrence L.. Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete. Report no. WHRP 07-05. Wisconsin Highway Research Program, 2007. https://rosap.ntl.bts.gov/view/dot/37804.
Sutter, Lawrence L. Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete. Wisconsin Highway Research Program, 2007, Report no. WHRP 07-05, ROSA P. https://rosap.ntl.bts.gov/view/dot/37804.
This research investigated primarily two methods of determining the air-void system parameters of hardened concrete. The methods investigated were the use of a flat-bed scanner and the use of a CT x-ray scanner. The flat-bed scanner proved to be an effective means of performing the analysis at a relatively low cost. The CT scanner proved to be technically feasible but not ready for general implementation outside of controlled laboratory conditions. The research also investigated the freeze-thaw performance of Wisconsin paving concrete mixtures prepared with vinsol resin air-entraining admixtures (AEA) and with non-vinsol (synthetic) AEAs. The mixtures prepared with vinsol resin based AEA performed in accordance with what has been historically reported in the literature. The mixtures prepared with synthetic AEAs performed better than the vinsol based AEA when the admixtures were used in low dosages (i.e. low air content). The results indicate that mixtures prepared with synthetic AEA could possibly be prepared with lower target air contents and a satisfactory level of freeze-thaw performance could be expected.
Sutter, L. L. (2007). Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete (Report No. WHRP 07-05). Wisconsin Highway Research Program. https://rosap.ntl.bts.gov/view/dot/37804
Sutter, Lawrence L.. Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete. Report no. WHRP 07-05. Wisconsin Highway Research Program, 2007. https://rosap.ntl.bts.gov/view/dot/37804.
Sutter, Lawrence L. Evaluation of Methods for Characterizing Air Void Systems in Wisconsin Paving Concrete. Wisconsin Highway Research Program, 2007, Report no. WHRP 07-05, ROSA P. https://rosap.ntl.bts.gov/view/dot/37804.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.