Townsend, T., Schert, J., & Vinson, T. (2015). Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash (Report No. BDV31-977-10). Florida. Dept. of Transportation. https://rosap.ntl.bts.gov/view/dot/28917
Townsend, Timothy, John Schert, and Tim Vinson. Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash. Report no. BDV31-977-10. Florida. Dept. of Transportation, 2015. https://rosap.ntl.bts.gov/view/dot/28917.
Townsend, Timothy, et al. Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash. Florida. Dept. of Transportation, 2015, Report no. BDV31-977-10, ROSA P. https://rosap.ntl.bts.gov/view/dot/28917.
Research was performed to support the development and recommendation of a standard operating procedure (SOP) for analyzing the ammonia content in fly ash intended for use in concrete. A review of existing ash producers found that several different analytical approaches are currently in use. Preliminary research involved examining both ammonia extraction and analysis techniques. An assessment of accuracy, precision, cost, and test duration was conducted for three test methods (salicylate color disc, ion-selective electrode, and gas detection tubes). The research team is recommending a standard operating procedure (SOP) utilizing a methodology involving the use of gas detection tubes to measure the headspace concentration of liberated ammonia gas above a mixed fly ash slurry in a closed flask. The measured gas phase concentration of ammonia in the flask headspace is then related to the amount of ammonia in the fly ash which was sampled. This method was selected as a preferred procedure because of higher accuracy and precision, consistent results, appropriate test duration, ease of use, and practical running costs. This SOP was beta tested at an ash producing facility in central Florida, and the method was then refined to address facility operator comments.
Townsend, T., Schert, J., & Vinson, T. (2015). Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash (Report No. BDV31-977-10). Florida. Dept. of Transportation. https://rosap.ntl.bts.gov/view/dot/28917
Townsend, Timothy, John Schert, and Tim Vinson. Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash. Report no. BDV31-977-10. Florida. Dept. of Transportation, 2015. https://rosap.ntl.bts.gov/view/dot/28917.
Townsend, Timothy, et al. Development of a Standard Operating Procedure for analysis of Ammonia Concentrations in Coal Fly Ash. Florida. Dept. of Transportation, 2015, Report no. BDV31-977-10, ROSA P. https://rosap.ntl.bts.gov/view/dot/28917.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.