Donnell, K. M., Ghasr, M. T., & Kinzel, E. C. (2014). Corrosion in Cement-Based Materials (Report No. NUTC R340). Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety. https://rosap.ntl.bts.gov/view/dot/27970
Donnell, Kristen M., Mohammad Tayeb Ghasr, and Edward C. Kinzel. Corrosion in Cement-Based Materials. Report no. NUTC R340. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2014. https://rosap.ntl.bts.gov/view/dot/27970.
Donnell, Kristen M., et al. Corrosion in Cement-Based Materials. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2014, Report no. NUTC R340, ROSA P. https://rosap.ntl.bts.gov/view/dot/27970.
The objective of this project focused on the development of a hybrid nondestructive testing and evaluation (NDT&E) methodology that combines the benefits of microwave NDT and thermography into one new technique. In this way, unique features of both NDT methods can be brought together to achieve new results that one method alone cannot achieve. Preliminary results have shown the combination of microwave and IR methods as a promising technique for detection corrosion in metals. The objective of this project is to build upon these preliminary results to investigate the feasibility of this new technique, herein referred to as Active Microwave Thermography (AMT), to detect and evaluate the presence of corrosion in cement-based materials (e.g., corrosion of reinforcing steel bars, or rebar), which is of critical importance to the nation’s transportation infrastructure. Included in this investigation was the acquisition of a small AMT system (designed and built by the graduate student supported by this project) to allow investigators to perform properly controlled experiments with consideration given to incident microwave power, distribution of the microwave energy, frequency, polarization of the incident signal, etc.
Donnell, K. M., Ghasr, M. T., & Kinzel, E. C. (2014). Corrosion in Cement-Based Materials (Report No. NUTC R340). Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety. https://rosap.ntl.bts.gov/view/dot/27970
Donnell, Kristen M., Mohammad Tayeb Ghasr, and Edward C. Kinzel. Corrosion in Cement-Based Materials. Report no. NUTC R340. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2014. https://rosap.ntl.bts.gov/view/dot/27970.
Donnell, Kristen M., et al. Corrosion in Cement-Based Materials. Missouri University of Science and Technology. Center for Transportation Infrastructure and Safety, 2014, Report no. NUTC R340, ROSA P. https://rosap.ntl.bts.gov/view/dot/27970.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.