Rose, J. G., Witt, T. W., Renfro, A. F., & Redigeway, N. E. (2009). Highway-railway at-grade crossing structures : rideability measurements and assessments (Report No. KTC-09-07/FR 136-04-4F). University of Kentucky Transportation Center. https://rosap.ntl.bts.gov/view/dot/21734
Rose, Jerry G., Thomas W. Witt, Aaron F. Renfro, and Nathan E. Redigeway. Highway-railway at-grade crossing structures : rideability measurements and assessments. Report no. KTC-09-07/FR 136-04-4F. University of Kentucky Transportation Center, 2009. https://rosap.ntl.bts.gov/view/dot/21734.
Rose, Jerry G., et al. Highway-railway at-grade crossing structures : rideability measurements and assessments. University of Kentucky Transportation Center, 2009, Report no. KTC-09-07/FR 136-04-4F, ROSA P. https://rosap.ntl.bts.gov/view/dot/21734.
This report provides two analyses for obtaining a quantitative means of rating the condition of railroad-highway at-grade crossings based on their measured roughness. Phase One of this report examined 11 crossings in the Lexington area by use of a laser inertial profiler from the Kentucky Transportation Cabinet (KYTC) and a Face Rolling Dipstick. Phase Two was a continuation of Phase One was 26 crossings examined using inertial profilers from both the KYTC and the National Center of Asphalt technology. Objective ratings based on rideability were obtained and wheelpath profiles were measured for each crossing. Several roughness indexes were computed from the measured profiles. A correlation between these indexes and subjective rideability ratings were examined in each study. Analysis of the data showed a tendency of objective ratings to decrease as roughness increases. this study found that highway inertial profilers are not an appropriate tool for determining roughness over short distances such as railroad crossings due to their application for testing of longer distances. It is anticipated that this report will be referenced for future research on this topic.
Rose, J. G., Witt, T. W., Renfro, A. F., & Redigeway, N. E. (2009). Highway-railway at-grade crossing structures : rideability measurements and assessments (Report No. KTC-09-07/FR 136-04-4F). University of Kentucky Transportation Center. https://rosap.ntl.bts.gov/view/dot/21734
Rose, Jerry G., Thomas W. Witt, Aaron F. Renfro, and Nathan E. Redigeway. Highway-railway at-grade crossing structures : rideability measurements and assessments. Report no. KTC-09-07/FR 136-04-4F. University of Kentucky Transportation Center, 2009. https://rosap.ntl.bts.gov/view/dot/21734.
Rose, Jerry G., et al. Highway-railway at-grade crossing structures : rideability measurements and assessments. University of Kentucky Transportation Center, 2009, Report no. KTC-09-07/FR 136-04-4F, ROSA P. https://rosap.ntl.bts.gov/view/dot/21734.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.