ROSA P serves as an archival repository of USDOT-published products including scientific findings, journal articles, guidelines, recommendations, or other information authored or co-authored by USDOT or funded partners.
As a repository, ROSA P retains documents in their original published format to ensure public access to scientific information.
"This project focused on instrumentation analysis of one Smart Structures Incorporated, EDC pile. In general, the EDC pile is a pre-stressed 18" x 18" concrete pile that has been outfitted with embedded strain gages and accelerometers at six locations along the pile's neutral axis. The purpose for these sensors is to provided the engineer with improved bearing capacity and pile stress estimates each time the pile is struck by the driving hammer. The primary objective of this project was to compare the data collected from these transducers with externally mounted sensors (accelerometers and strain gages) via two complementary and independed data acquisition systems"--P. 1.
The work focused on the improvement of FB-DEEP’s prediction of skin and tip resistance of concretepiles and drilled shafts in Florida. For the work,...
In this project, University of Florida researcherssought to improve the unit skin friction and tipresistance correlations embedded in the FB-Deepsoftw...
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.