Control of Wheel/Rail Noise and Vibration
-
1982-04-01
Details:
-
Creators:
-
Corporate Creators:
-
Corporate Contributors:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Corporate Publisher:
-
Abstract:An analytical model of the generation of wheel/rail noise has been developed and validated through an extensive series of field tests carried out at the Transportation Test Center using the State of the Art Car. A sensitivity analysis has been performed using the analytical model. That analysis showed that wheel/rail noise is relatively insensitive to changes in most system parameter values, except wheel and rail roughness, contact area and contact stiffness. The surface finish produced by most wheel truing and rail grinding machines has been measured. A belt grinder used by the Toronto Transit Commission for wheel truing and a rail grinding block car used by the Chicago Transit Authority to grind rails were found to produce the quietest surface finishes giving an estimated 12 dBA of noise reduction when compared with typical rapid transit wheels and rails in revenue service. A scale model of a new concept wheel employing a resilient tread has been built and tested. Noise reductions of up to 8 dBA were achieved with tread stresses in the manageable range.
-
Format:
-
Collection(s):
-
Main Document Checksum:
-
File Type:
Supporting Files
-
No Additional Files
More +