US Transportation Collection
The US Transportation Collection consists of documents from across all transportation modes with specific focus on research reports from US DOT, state DOTs, and other transportation organizations. Bookmark this collection: https://rosap.ntl.bts.gov/collection_ust or https://doi.org/10.21949/1530857.
- 2014 7
- Box girder bridges 2
- Bridges 1
- Cracking 2
- Data analysis 1
- Data collection 5
- Electric batteries 1
- Equipment tests 1
- Error analysis 1
- Field studies 4
- Finite element method 2
- Girder bridges 1
- Girders 2
- Instrumentation 5
- Load tests 1
- Monitoring 2
- Noise 1
- Piles (Supports) 1
- Posttensioning 2
- Prestressed concrete bridges 2
- Remote sensing 5
- Sensors 1
- Solar collectors 1
- Specifications 1
- Steel bridges 2
- Steel plates 1
- Strain (Mechanics) 1
- Stresses 1
- Structural health monitoring 7
- Temperature 5
- Traffic loads 1
- Truss bridges 1
- Validation 1
- Vibration 1
- Wireless communication systems 1
- SPR-2256 (7)
(Max 200)
- Box girder bridges (2)
- Bridges (1)
- Cracking (2)
- Data analysis (1)
- Data collection (5)
- Electric batteries (1)
- Equipment tests (1)
- Error analysis (1)
- Field studies (4)
- Finite element method (2)
- Girder bridges (1)
- Girders (2)
- Instrumentation (5)
- Load tests (1)
- Monitoring (2)
- Noise (1)
- Piles (Supports) (1)
- Posttensioning (2)
- Prestressed concrete bridges (2)
- Remote sensing (5)
- Sensors (1)
- Solar collectors (1)
- Specifications (1)
- Steel bridges (2)
- Steel plates (1)
- Strain (Mechanics) (1)
- Stresses (1)
- Structural health monitoring (7)
- Temperature (5)
- Traffic loads (1)
- Truss bridges (1)
- Validation (1)
- Vibration (1)
- Wireless communication systems (1)
- :Scianna, Adam ;Prusaczyk, Stephen2014-08-01:This report describes the instrumentation and data acquisition for a continuous curved steel box-girder composite bridge inConnecticut. The computer-b...
- :Scianna, Adam ;Prusaczyk, Stephen2014-08-01:This report describes the instrumentation and data acquisition for a three-span continuous, curved post-tensioned box-girderbridge in Connecticut. The...
- :Plude, Shelley ;Prusaczyk, Stephen2014-08-01:This report describes the instrumentation and data acquisition for a multi-girder, composite steel bridge in Connecticut. Thecomputer-based remote mon...
- :Scianna, Adam ;Prusaczyk, Stephen2014-08-01:This report describes the instrumentation and data acquisition for the center hung segment in the largesttruss bridge in Connecticut, located on the i...
- :Christenson, Richard E. ;DeWolf, John T.2014-08-01:This report proposes a set of specifications for bridge structural health monitoring that has resulted from theexperiences gained during the installat...
- :Scianna, Adam ;Prusaczyk, Stephen2014-08-01:This report describes the instrumentation and data acquisition for an eleven span segmental, post-tensionedbox-girder bridge in Connecticut. Based on ...
- :Prusaczyk, Stephen ;Trivedi, Harinee2014-08-01:This report describes the instrumentation and data acquisition system for monitoring of a continuous span steel plategirder bridge with a composite co...
Exit Notification/Disclaimer Policy
Thank you for visiting.
You are about to access a non-government link outside of the U.S. Department of Transportation's National Transportation Library.
Please note: While links to Web sites outside of DOT are offered for your convenience, when you exit DOT Web sites, Federal privacy policy and Section 508 of the Rehabilitation Act (accessibility requirements) no longer apply. In addition, DOT does not attest to the accuracy, relevance, timeliness or completeness of information provided by linked sites. Linking to a Web site does not constitute an endorsement by DOT of the sponsors of the site or the products presented on the site. For more information, please view DOT's Web site linking policy.
To get back to the page you were previously viewing, click your Cancel button.