Develop Guidelines for Evaluation of Embankment Conditions in Bridge Approach Slabs and Pavement Structures
Details
-
Creators:
-
Corporate Creators:
-
Corporate Publisher:
-
Corporate Contributors:
-
Subject/TRT Terms:
- Bridge approaches
- Slabs
- Traffic lanes
- Embankments
- Pavement distress
- Evaluation
- Forensic science
- Investigation of structure
- Repairing
- Maintenance
- Guidelines
- Laboratory tests
- Bridge Approach Slabs (BAS)
- Roadway Embankments
- Distress Mechanisms
- Embankment Evaluation
- Forensic Investigation
- Maintenance and Repair Strategies
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Edition:September 2023 - August 2026
-
Description:Distress at bridge approach slabs (BAS), adjacent pavement, and roadway embankments remains a recurring maintenance concern, commonly appearing as settlement, bumps, faulting, lane separation, cracking, and voids beneath slabs. The performance of these systems is often related to the condition of the underlying embankment and support materials. However, current TxDOT documentation does not provide a unified guideline for evaluating in-service embankment conditions or selecting repairs based on the underlying distress mechanism. Project 0-7173 was conducted to develop guidance for characterizing BAS and adjacent pavement conditions in roadway embankment areas and for selecting maintenance and repair strategies that address both visible distress and probable root causes. The research included a literature review of current evaluation and post-construction repair practices, a statewide survey of TxDOT districts, selection of representative field sections, field and laboratory evaluations using falling weight deflectometer (FWD), ground-penetrating radar (GPR), coring, dynamic cone penetrometer (DCP), cone penetration test (CPT), and soil sampling, and classification of observed distress mechanisms. The field and analytical findings were used to classify four primary distress mechanisms: compression of materials, loss of materials or washout, lateral stress buildup behind retaining walls, and non-uniform slab support. Based on these mechanisms, a three-level repair-selection framework was developed to identify the active distress mechanism, address the root cause, and then apply corrective repair measures for remaining surface distress. The outcomes of this project provide TxDOT engineers with a consistent, mechanism-based approach for evaluating embankment-related BAS and pavement distress and selecting repair strategies that are better aligned with the cause of poor performance.
-
Format:
-
Funding:
-
Download URL:
-
File Type:
-
Collection(s):
-
Main Document Checksum:urn:sha-512:24598162509994ee6107bcef1cb95b389cbf17888ae786faa72afbe3162e2b6ead14a1e9459d57fd122fbed2075256223623f15842d2dad63d5a19bf7c7875ec