Jones, H. L., James, M. E., & Cline, T. W. (1975). Automated Design of Prestressed Concrete Box Girders (Report No. TTI-2-5-75-194-lF). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/84785
Jones, Harry L., Mike E. James, and Terry W. Cline. Automated Design of Prestressed Concrete Box Girders. Report no. TTI-2-5-75-194-lF. Texas Transportation Institute. Texas A&M University, 1975. https://rosap.ntl.bts.gov/view/dot/84785.
Jones, Harry L., et al. Automated Design of Prestressed Concrete Box Girders. Texas Transportation Institute. Texas A&M University, 1975, Report no. TTI-2-5-75-194-lF, ROSA P. https://rosap.ntl.bts.gov/view/dot/84785.
Three computer programs have been developed or adapted to assist in the design of multi-beam prestressed concrete box girder bridges. Programs DBOXSS and DBOXDS treat girders with straight and draped strands, respectively. Each program has a "design'' option which selects. concrete release strength and strand pattern for a specified cross section and 28-day concrete strength to minimize-the total number of strands used. The programs also contain an "optimization" option which determines release and 28-day concrete strengths and strand pattern that minimize the total cost of the girder. An analyst's program AMBB has a1so been developed to compute lateral load distribution factors for the members of a multi-beam bridge. Specifications governing the designs produced are from the American Association of State Highway and Transportation Officials, 1973 Bridge Specification and 1974 and 1975 Interim Specification.
Jones, H. L., James, M. E., & Cline, T. W. (1975). Automated Design of Prestressed Concrete Box Girders (Report No. TTI-2-5-75-194-lF). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/84785
Jones, Harry L., Mike E. James, and Terry W. Cline. Automated Design of Prestressed Concrete Box Girders. Report no. TTI-2-5-75-194-lF. Texas Transportation Institute. Texas A&M University, 1975. https://rosap.ntl.bts.gov/view/dot/84785.
Jones, Harry L., et al. Automated Design of Prestressed Concrete Box Girders. Texas Transportation Institute. Texas A&M University, 1975, Report no. TTI-2-5-75-194-lF, ROSA P. https://rosap.ntl.bts.gov/view/dot/84785.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.