Experimental and Analytical Evaluation of Residual Capacity of Corrosion-Damaged Prestressed Concrete Bridge Girders
-
2025-04-01
-
Details:
-
Creators:
-
Corporate Creators:
-
Corporate Contributors:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Edition:Final Contract
-
Corporate Publisher:
-
Abstract:The durability of infrastructure components, such as prestressed concrete bridge beams, can be significantly affected by long-term deterioration associated with corrosion. Corrosion is a major concern for bridges in Virginia, due to the frequent use of deicing salts during the winter, as well as the number of structures in marine environments. The residual capacity of corrosion damaged prestressed I-beams and box beams needs to be accurately estimated to determine if damaged bridges need to be posted, and to help with making informed decisions related to repair, rehabilitation and replacement of damaged bridges. This report presents the results of testing of six corrosion-damaged prestressed beams removed from existing bridges during their demolition. Three beams were Type II AASHTO I-beams extracted from the Lesner Bridge in Virginia Beach, and three were 48 in wide by 27 in deep box beams extracted from the Aden Road Bridge near Quantico, Virginia. Prior to testing, the beams were visually inspected, and two types of non-destructive evaluations were performed to identify corrosion activity: resistivity measurements and half-cell potential measurements. The beams were then tested in the lab to determine their flexural strength. Following testing, samples of strand were removed and tested to determine their tensile properties. Cores were taken from the Aden Road beams and from both the beams and decks of the Lesner Bridge beams to determine compressive strength. Powdered concrete samples were removed to perform chloride concentration tests.
-
Format:
-
Funding:
-
Collection(s):
-
Main Document Checksum:
-
Download URL:
-
File Type: