Andrews, E. M., Smith, R. E., Beatty, C. K., & Button, J. W. (1994). Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses (Report No. FHWA/TX-95/1289-1). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/82463
Andrews, Edward M., Roger E. Smith, Colin K. Beatty, and Joe W. Button. Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses. Report no. FHWA/TX-95/1289-1. Texas Transportation Institute. Texas A&M University, 1994. https://rosap.ntl.bts.gov/view/dot/82463.
Andrews, Edward M., et al. Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses. Texas Transportation Institute. Texas A&M University, 1994, Report no. FHWA/TX-95/1289-1, ROSA P. https://rosap.ntl.bts.gov/view/dot/82463.
This study examined the repeatability of the International Slurry Surfacing Association (ISSA) mixture design tests by evaluating the variability of the test results obtained. Consistencies between material combinations and within a given material formulation were evaluated. The repeatability of the tests using materials falling within current micro-surfacing specifications was obtained. Material compositions were varied, and the responses for the various tests were examined to identify any definite trends. This process revealed more about the behavior of materials used in typical micro-surfacing mixtures. The establishment of the repeatability of these tests and the observation of the impact of material variation is an initial investigation that provides a foundation for future micro-surfacing research.
Andrews, E. M., Smith, R. E., Beatty, C. K., & Button, J. W. (1994). Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses (Report No. FHWA/TX-95/1289-1). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/82463
Andrews, Edward M., Roger E. Smith, Colin K. Beatty, and Joe W. Button. Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses. Report no. FHWA/TX-95/1289-1. Texas Transportation Institute. Texas A&M University, 1994. https://rosap.ntl.bts.gov/view/dot/82463.
Andrews, Edward M., et al. Evaluation of Micro-Surfacing Mixture Design Procedures and the Effects of Material Variation on the Test Responses. Texas Transportation Institute. Texas A&M University, 1994, Report no. FHWA/TX-95/1289-1, ROSA P. https://rosap.ntl.bts.gov/view/dot/82463.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.