Glover, C. J., Davison, R. R., Domke, C. H., Ruan, Y., Juristyarini, P., Knorr, D. B., & Jung, S. H. (2005). Development of a New Method for Assessing Asphalt Binder Durability with Field Validation (Report No. FHWA/TX-05/1872-2). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/81884
Glover, Charles J., Richard R. Davison, Chris H. Domke, Yonghong Ruan, Pramitha Juristyarini, Daniel B. Knorr, and Sung H. Jung. Development of a New Method for Assessing Asphalt Binder Durability with Field Validation. Report no. FHWA/TX-05/1872-2. Texas Transportation Institute. Texas A&M University, 2005. https://rosap.ntl.bts.gov/view/dot/81884.
Glover, Charles J., et al. Development of a New Method for Assessing Asphalt Binder Durability with Field Validation. Texas Transportation Institute. Texas A&M University, 2005, Report no. FHWA/TX-05/1872-2, ROSA P. https://rosap.ntl.bts.gov/view/dot/81884.
This project was a comprehensive study directed at developing an improved method of screening asphalt binders for long-term pavement performance. A new dynamic shear rheometer (DSR) function and a new aging procedure should warn of premature asphalt hardening and resulting fatigue cracking. For unmodified asphalts the new DSR function GN/(0N/GN) correlated well with ductility (at 15 C, 1 cm/min) below 10 cm. The correlation was originally developed for DSR measurements at 15 C and 0.005 rad/s. These conditions were time-temperature superposition shifted to 44.7 C and 10 rad/s to produce a method that is easily accessible to standard laboratory rheological equipment and methods. The recommended aging procedure uses the pressure aging vessel (PAV) apparatus but takes advantage of the higher average aging rate when the asphalt is aged in thinner films. This change, combined with somewhat longer aging, results in a more rigorous test of durability than the standard PAV method. At the same time, the resulting rankings of aged materials are more representative of rankings that are obtained from aging at atmospheric air pressure and 60 C.
Glover, C. J., Davison, R. R., Domke, C. H., Ruan, Y., Juristyarini, P., Knorr, D. B., & Jung, S. H. (2005). Development of a New Method for Assessing Asphalt Binder Durability with Field Validation (Report No. FHWA/TX-05/1872-2). Texas Transportation Institute. Texas A&M University. https://rosap.ntl.bts.gov/view/dot/81884
Glover, Charles J., Richard R. Davison, Chris H. Domke, Yonghong Ruan, Pramitha Juristyarini, Daniel B. Knorr, and Sung H. Jung. Development of a New Method for Assessing Asphalt Binder Durability with Field Validation. Report no. FHWA/TX-05/1872-2. Texas Transportation Institute. Texas A&M University, 2005. https://rosap.ntl.bts.gov/view/dot/81884.
Glover, Charles J., et al. Development of a New Method for Assessing Asphalt Binder Durability with Field Validation. Texas Transportation Institute. Texas A&M University, 2005, Report no. FHWA/TX-05/1872-2, ROSA P. https://rosap.ntl.bts.gov/view/dot/81884.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.