Hurlebaus, S., Mander, J. B., Birely, A. C., Terzioglu, T., Cui, J., & Park, S. H. (2019). Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples (Report No. FHWA/TX-18/0-6893-P1, Report 0-6893-P1). Texas A&M Transportation Institute. https://rosap.ntl.bts.gov/view/dot/64553
Hurlebaus, Stefan, John B. Mander, Anna C. Birely, Tevfik Terzioglu, Jilong Cui, and Sun Hee Park. Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples. Report no. FHWA/TX-18/0-6893-P1, Report 0-6893-P1. Texas A&M Transportation Institute, 2019. https://rosap.ntl.bts.gov/view/dot/64553.
Hurlebaus, Stefan, et al. Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples. Texas A&M Transportation Institute, 2019, Report no. FHWA/TX-18/0-6893-P1, Report 0-6893-P1, ROSA P. https://rosap.ntl.bts.gov/view/dot/64553.
Inverted-T bent caps have been widely used in Texas to reduce the overall elevation of bridges, to improve the available clearance beneath the beams, and to improve aesthetics. Since bridge design criteria have been improved and modified over the decades, many of the early inverted-T bent caps are deficient when evaluated against the current design approach and/or lack adequate strength to support planned increases to live load demands. Therefore, techniques for strengthening these bent caps are needed. In this volume, the recommendations for identifying deficiencies of in-service bent caps are addressed along with the recommendations for selecting retrofit solutions to use. Based on the observations of the tests described in Volume 2, design procedures for six solutions are provided: end-region stiffener, clamped threadbar with channel, load-balancing post-tensioning, concrete infill with partial- and full-depth fiber reinforced polymer anchored by steel waling for the bent, and large bearing pad. Step-by-step procedures for each solution and design examples of each solution for the bent caps described are provided.
Hurlebaus, S., Mander, J. B., Birely, A. C., Terzioglu, T., Cui, J., & Park, S. H. (2019). Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples (Report No. FHWA/TX-18/0-6893-P1, Report 0-6893-P1). Texas A&M Transportation Institute. https://rosap.ntl.bts.gov/view/dot/64553
Hurlebaus, Stefan, John B. Mander, Anna C. Birely, Tevfik Terzioglu, Jilong Cui, and Sun Hee Park. Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples. Report no. FHWA/TX-18/0-6893-P1, Report 0-6893-P1. Texas A&M Transportation Institute, 2019. https://rosap.ntl.bts.gov/view/dot/64553.
Hurlebaus, Stefan, et al. Strengthening of Existing Inverted-T Bent Caps: Design Recommendations and Examples. Texas A&M Transportation Institute, 2019, Report no. FHWA/TX-18/0-6893-P1, Report 0-6893-P1, ROSA P. https://rosap.ntl.bts.gov/view/dot/64553.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.