Guidelines for Formulating and Writing Process Control Documents and Process Specifications for Advanced Materials

Tomblin, John; Lovingfoss, Royal; Andrulonis, Rachael

doi:10.21949/1524508

i

Guidelines for Formulating and Writing Process Control Documents and Process Specifications for Advanced Materials

2022-10-01
By Tomblin, John ; Lovingfoss, Royal ; Andrulonis, Rachael

File Language:

English

Details

Creators:

Tomblin, John ; Lovingfoss, Royal ; Andrulonis, Rachael
Corporate Creators:

Wichita State University ; National Institute for Aviation Research (U.S.)
Corporate Contributors:

United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center ; United States. Department of Transportation. Federal Aviation Administration. Joint Center of Excellence for Advanced Materials
Subject/TRT Terms:
Publication/ Report Number:

DOT/FAA/TC-21/49
DOI:

https://doi.org/10.21949/1524508
Resource Type:

Tech Report
Geographical Coverage:

United States
Contracting Officer:

Oztekin, Ahmet
Corporate Publisher:

United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center
Abstract:

This report presents a set of guidelines for information recommended to be included in process control documents and process specifications for non-metallic advanced materials. The guidelines are organized by general information that applies to all polymer-based material systems, followed by specific information listed by material type. It is intended to outline important elements/topics that must be discussed to ensure proper control of advanced materials and parts. This document includes a general process specification outline for building parts from the following material forms: polymer matrix composites based on thermosets from prepreg, polymer matrix composites based on thermosets from resin transfer molding, polymer matrix composites based on thermoplastics from a semi-preg/prepreg, bonding using adhesives (paste and film), ceramic matrix composites prepreg, and polymer-based additively manufactured materials.
Format:

PDF
Funding:

12-C-AM-WISU
Download URL:

https://rosap.ntl.bts.gov/view/dot/64473/dot_64473_DS1.pdf
File Type:

[PDF - 822.19 KB]
Collection(s):

FAA William J. Hughes Technical Center for Advanced Aerospace
Main Document Checksum:

urn:sha-512:73b8a781772a70f233e3d15fab88046160f9380411871e6a7b4b4581a776b0106e507a452a90d6a4e9e3f921d6b7da9147c09160c01bfceaaf8aae51cc1ada99

File Language:

English

ON THIS PAGE

Details

Found an issue?

Send us an email at:

publishinghd@cdc.gov

ROSA P serves as an archival repository of USDOT-published products including scientific findings, journal articles, guidelines, recommendations, or other information authored or co-authored by USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to ensure public access to scientific information.