M105: Low-Cost Modal Identification Sensors for Bridge Field Testing

Details

• Alternative Title:
  Low-Cost Modal Identification Sensors for Bridge Field Testing [Cover title]
• Creators:
  Linzell, Daniel G. ; Eftekhar Azam, Saeed ; Ardani, Samira ; Rageh, Ahmed
• Corporate Creators:
  University of Nebraska--Lincoln
• Corporate Contributors:
  Nebraska. Department of Transportation ; United States. Department of Transportation. Federal Highway Administration
• Subject/TRT Terms:
  Bridges Calibration Dynamic Load Rating Dynamic Loads Field Tests Finite Element Method Finite Element Modeling Model Calibration Sensors Smartphones Low-cost Sensors Static Load Rating Static Loads Vibration Tests

  More +
• Publication/ Report Number:
  M105
• Resource Type:
  Tech Report
• Geographical Coverage:
  United States
• Edition:
  Final Report July 2019 – March 2021
• Corporate Publisher:
  Nebraska. Department of Transportation
• Abstract:
  This report provides a framework for experimental load rating of bridges via inclusion of low-cost dynamic sensors and dynamic tests. Currently 25% of the bridges in Nebraska are posted for live load. According to the National Bridge Inventory (NBI) in 2012, 93% of all postings in the US were based analytical load ratings, 7% were posted using field evaluation and engineering judgement, and 1% were posted using experimental load rating methods. Instrumentation costs and traffic interruptions can be problematic when load testing is necessary to accurately assess in-situ bridge live load capacity. Recent advances in (i) sensing technology and (ii) numerical methods used to process test data permit more cost-effective data-enabled decision making. According to the AASHTO Manual for Bridge Evaluation (MBE), dynamic tests can be used for calibration of bridge numerical models which could enhance the value of a diagnostic load test. This project helps engineers select and use inexpensive, off the shelf dynamic sensors for dynamic testing and load rating of bridges in Nebraska and elsewhere. To help identify low-cost dynamic sensors suitable for Operational Modal Analysis (OMA), a set of bridges featuring various construction materials, span lengths, and structural systems were selected for vibration tests. Via tests conducted on the bridges, two low-cost sensors were downselected from five initial candidates. To ensure applicability of vibration tests to perform experimental load ratings, bridges were chosen as test beds for conducting vibration-based load ratings under operational conditions with results compared to data produced from strain measurements from controlled live load testing using. It was shown that vibration tests conducted using low-cost sensors and OMA can help engineers accurately complete bridge load ratings.
• Format:
  PDF
• Funding:
  SPR-P1(20) M105
• Collection(s):
  US Transportation Collection
• Main Document Checksum:
  urn:sha-512:8f8f8fef2b5fb78589b323942bc90da589d730ec40edd1b5325a58fd4c67750d7985c2fc4b38da8e1c76a60d5fe3f9241ba14bb2d0e63f4fb9069acfadbf7e83
• Download URL:
  https://rosap.ntl.bts.gov/view/dot/56800/dot_56800_DS1.pdf
• File Type:
  [PDF - 14.16 MB ]