Taylor, T., Collin, J., & Berg, R. (2017). Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls (Report No. FHWA-NHI-17-068). United States. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/54190
Taylor, Tom, Jim Collin, and Ryan Berg. Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls. Report no. FHWA-NHI-17-068. United States. Federal Highway Administration, 2017. https://rosap.ntl.bts.gov/view/dot/54190.
Taylor, Tom, et al. Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls. United States. Federal Highway Administration, 2017, Report no. FHWA-NHI-17-068, ROSA P. https://rosap.ntl.bts.gov/view/dot/54190.
This document presents a parametric study that demonstrates the broad applicability of the soil nail wall load and resistance factor design (LRFD) and analysis procedure that is detailed in Geotechnical Engineering Circular No. 7 (GEC 7), Soil Nail Walls Reference Manual (FHWA-NHI-14-007), to various soil nail wall design heights, soil parameters, and different commercially available software programs. The parametric study uses a framework for the design of soil nail walls that considers the factors of safety used in the allowable stress design (ASD) analysis method while integrating LRFD design principles as demonstrated in GEC 7. The study starts by analyzing a soil nail structure using an ASD-based limit equilibrium (LE) slope stability program at a defined minimum target factor of safety. From the LE results, the nominal tensile, pullout, and facing loads of each soil nail are extracted. The extracted data are then checked using the LRFD platform using the procedures, and the load and resistance factors, presented in GEC 7.
Taylor, T., Collin, J., & Berg, R. (2017). Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls (Report No. FHWA-NHI-17-068). United States. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/54190
Taylor, Tom, Jim Collin, and Ryan Berg. Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls. Report no. FHWA-NHI-17-068. United States. Federal Highway Administration, 2017. https://rosap.ntl.bts.gov/view/dot/54190.
Taylor, Tom, et al. Evaluation of Limit Equilibrium Analysis Methods for Design of Soil Nail Walls. United States. Federal Highway Administration, 2017, Report no. FHWA-NHI-17-068, ROSA P. https://rosap.ntl.bts.gov/view/dot/54190.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.