Stockdale, G., Riggs, H. R., & Robertson, I. N. (2012). Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring (Report No. UHM/CEE/12-01). University of Hawaii at Manoa. Department of Civil and Environmental Engineering. https://rosap.ntl.bts.gov/view/dot/53909
Stockdale, Gabriel, H Ronald Riggs, and Ian N. Robertson. Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring. Report no. UHM/CEE/12-01. University of Hawaii at Manoa. Department of Civil and Environmental Engineering, 2012. https://rosap.ntl.bts.gov/view/dot/53909.
Stockdale, Gabriel, et al. Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring. University of Hawaii at Manoa. Department of Civil and Environmental Engineering, 2012, Report no. UHM/CEE/12-01, ROSA P. https://rosap.ntl.bts.gov/view/dot/53909.
In order to promote the widespread application of sensor-based structural health monitoring (SHM) systems, complete and standardized systems need to be developed that are adaptable, can immediately begin to monitor the structure’s performance to some degree, and be incorporated into the rehabilitation practices. The combination of fiber reinforced polymer (FRP) laminates and fiber Bragg grating (FBG) strain sensors have the potential to produce such a system for concrete structures. In this work, general processing procedures are developed that efficiently: (1) manage and process the recorded data; (2) ensure the recorded data is accurate and the sensors are working properly; and (3) monitor the limit states of the FRP laminates regardless of their application. The effectiveness of these procedures are then demonstrated through a case study involving the FBG instrumentation of a carbon FRP laminate rehabilitation applied to the Salt Lake Boulevard Bridge for shear strengthening.
Stockdale, G., Riggs, H. R., & Robertson, I. N. (2012). Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring (Report No. UHM/CEE/12-01). University of Hawaii at Manoa. Department of Civil and Environmental Engineering. https://rosap.ntl.bts.gov/view/dot/53909
Stockdale, Gabriel, H Ronald Riggs, and Ian N. Robertson. Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring. Report no. UHM/CEE/12-01. University of Hawaii at Manoa. Department of Civil and Environmental Engineering, 2012. https://rosap.ntl.bts.gov/view/dot/53909.
Stockdale, Gabriel, et al. Generalized Processing of FBG/FRP Strain Data for Structural Health Monitoring. University of Hawaii at Manoa. Department of Civil and Environmental Engineering, 2012, Report no. UHM/CEE/12-01, ROSA P. https://rosap.ntl.bts.gov/view/dot/53909.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.