Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report]
Franke, K. W. (2018). Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report] (Report No. UT-18.11). Utah. Dept. of Transportation. https://rosap.ntl.bts.gov/view/dot/42389
Franke, Kevin W. Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report]. Report no. UT-18.11. Utah. Dept. of Transportation, 2018. https://rosap.ntl.bts.gov/view/dot/42389.
Franke, Kevin W Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report]. Utah. Dept. of Transportation, 2018, Report no. UT-18.11, ROSA P. https://rosap.ntl.bts.gov/view/dot/42389.
The purpose of this addendum report is to document the process used to develop updated standard penetration test (SPT)-compatible liquefaction parameter maps for the states of Alaska, Connecticut, Idaho, Montana, Oregon, South Carolina, and Utah. The seismic source model developed by the US Geological Survey (USGS) and developed in 2014 was used to develop updated liquefaction parameter maps for the states of Connecticut, Idaho, Montana, Oregon, South Carolina, and Utah. The most recent USGS seismic source models available for the state of Alaska were from 2008 for mapping the hazards of liquefaction triggering, post-liquefaction settlement, and Newmark seismic slope displacement. The USGS 2002 seismic source model was the most recent model available for mapping the hazard of lateral spread displacement for Alaska. All of the completed reference parameter maps have been added to a publicly-available and interactive database. Hard copies of the developed updated reference parameter maps are also included in the appendix of this addendum report.
Franke, K. W. (2018). Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report] (Report No. UT-18.11). Utah. Dept. of Transportation. https://rosap.ntl.bts.gov/view/dot/42389
Franke, Kevin W. Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report]. Report no. UT-18.11. Utah. Dept. of Transportation, 2018. https://rosap.ntl.bts.gov/view/dot/42389.
Franke, Kevin W Simplified Standard Penetration Test Performance-Based Assessment of Liquefaction and Effects: Updated Liquefaction Parameter Mapping [Addendum Report]. Utah. Dept. of Transportation, 2018, Report no. UT-18.11, ROSA P. https://rosap.ntl.bts.gov/view/dot/42389.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.