Pilko, P., Bared, J. G., Edara, P. K., & Kim, T. (2007). Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief] (Report No. FHWA-HRT-07-031). United States. Federal Highway Administration. Office of Research, Development, and Technology. https://rosap.ntl.bts.gov/view/dot/38722
Pilko, Peter, Joe G. Bared, Praveen K. Edara, and Taehyeong Kim. Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief]. Report no. FHWA-HRT-07-031. United States. Federal Highway Administration. Office of Research, Development, and Technology, 2007. https://rosap.ntl.bts.gov/view/dot/38722.
Pilko, Peter, et al. Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief]. United States. Federal Highway Administration. Office of Research, Development, and Technology, 2007, Report no. FHWA-HRT-07-031, ROSA P. https://rosap.ntl.bts.gov/view/dot/38722.
The decision to build a new interchange between an existing pair of interchanges is made by evaluating whether there is sufficient need for traffic to enter and/or exit the freeway at that location. The obvious intent is to reduce the systemwide travel times and delays for all users by providing convenient freeway access and egress. Although there are ways to evaluate these operational benefits quantitatively, to date researchers have not expressed in measurable terms the compromise in safety, or the increase in crashes per mile of freeway. This knowledge is essential for conducting a comprehensive cost-benefit analysis of new interchange construction projects. To fill this void, we endeavored to study interchange spacing from a safety perspective by estimating regression models to express crash frequencies as a function of highway characteristics, including interchange spacing. We then used the regression models to quantify the crash sensitivity to interchange spacing for fatal and injury crashes. We used data pertaining to freeway sections from 7 urban freeways in California and 10 urban areas in Washington for building the regression models.
Pilko, P., Bared, J. G., Edara, P. K., & Kim, T. (2007). Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief] (Report No. FHWA-HRT-07-031). United States. Federal Highway Administration. Office of Research, Development, and Technology. https://rosap.ntl.bts.gov/view/dot/38722
Pilko, Peter, Joe G. Bared, Praveen K. Edara, and Taehyeong Kim. Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief]. Report no. FHWA-HRT-07-031. United States. Federal Highway Administration. Office of Research, Development, and Technology, 2007. https://rosap.ntl.bts.gov/view/dot/38722.
Pilko, Peter, et al. Safety Assessment of Interchange Spacing on Urban Freeways : [techbrief]. United States. Federal Highway Administration. Office of Research, Development, and Technology, 2007, Report no. FHWA-HRT-07-031, ROSA P. https://rosap.ntl.bts.gov/view/dot/38722.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.