Investigation of laboratory test procedures for assessing the structural capacity of geogrid-reinforced aggregate base materials.

Details

• Creators:
  Guthrie, W. Spencer ; Knighton, Jaren T.
• Corporate Creators:
  Brigham Young University. Department of Civil and Environmental Engineering
• Corporate Contributors:
  Utah. Dept. of Transportation ; United States. Federal Highway Administration
• Subject/TRT Terms:
  Aggregate Base Materials Aggregates Base Course (Pavements) Biaxial Geogrid Geogrids Granular Bases Mechanistic-empirical Pavement Design Modulus Quick Shear Test Subbase (Pavements) Triaxial Geogrid

  More +
• Publication/ Report Number:
  UT-16.11
• Resource Type:
  Tech Report
• Geographical Coverage:
  Utah ; United States
• Corporate Publisher:
  Utah. Department of Transportation
• Abstract:
  The objective of this research was to identify a laboratory test method that can be used to quantify improvements in structural capacity of aggregate base materials reinforced with geogrid. For this research, National Cooperative Highway Research Program Report 598 repeated load triaxial, American Association of State Highway and Transportation Officials (AASHTO) T 307 quick shear, and CBR testing protocols were used to test unreinforced and geogrid-reinforced aggregate base materials from northern Utah. Biaxial and triaxial geogrid were investigated in multiple reinforcement configurations. Several statistical analyses were performed on the results of each test method to identify the test that is most likely to consistently show an improvement in the structural capacity of aggregate base materials reinforced with geogrid. The results of this research indicate that, for the methods and materials evaluated in this study, calculation of the modulus at 2 percent strain from the AASHTO T 307 quick shear data is the test method most likely to consistently show an improvement in structural capacity associated with geogrid reinforcement. Of the three configurations investigated as part of this research, placing the geogrid at an upper position within a specimen is preferred. Given that the end goal of the use of geogrid reinforcement is to improve pavement performance, additional research is needed to compare the results of the AASHTO T 307 quick shear test obtained in the laboratory with the structural capacity of geogrid-reinforced aggregate base materials measured in the field. In addition, correlations between the results of the AASHTO T 307 quick shear test and resilient modulus need to be investigated in order to incorporate the findings of the AASHTO T 307 quick shear test on reinforced base materials into mechanistic-empirical pavement design.
• Format:
  PDF
• Funding:
  12-9110, W.O. no. 5H07690H
• Collection(s):
  US Transportation Collection
• Main Document Checksum:
  urn:sha256:55b4a9d8a1232d24e23cc50d11a6db975190a0523d6785c03b465fbe20d6c672
• Download URL:
  https://rosap.ntl.bts.gov/view/dot/32405/dot_32405_DS1.pdf
• File Type:
  [PDF - 1.50 MB ]