Integral bridge abutment-to-approach slab connection.

Details

• Creators:
  Greimann, Lowell ; Phares, Brent ; Faris, Adam ; Bigelow, Jake
• Corporate Creators:
  Iowa State University. Center for Transportation Research and Education
• Corporate Contributors:
  Iowa. Dept. of Transportation ; Iowa. Highway Research Board
• Subject/TRT Terms:
  Bridge Abutments Bridge Approaches Bridge Approaches--Iowa--Evaluation Bridge Members Bridges Evaluation Bridges--Iowa--Abutments
• Publication/ Report Number:
  IHRB Project TR-530 & TR-539;CTRE Project 05-197 & 05-219
• Resource Type:
  Tech Report
• Geographical Coverage:
  Iowa
• Edition:
  Final report.
• Corporate Publisher:
  Iowa State University. Center for Transportation Research and Education
• Abstract:
  The Iowa Department of Transportation has long recognized that approach slab pavements of integral abutment bridges are prone to settlement and cracking, which manifests as the "bump at the end of the bridge". A commonly recommended solution is to integrally attach the approach slab to the bridge abutment. Two different approach slabs, one being precast concrete and the other being cast-inplace concrete, were integrally connected to side-by-side bridges and investigated. The primary objective of this investigation was to evaluate the approach slab performance and the impacts the approach slabs have on the bridge. To satisfy the research needs, the project scope involved a literature review, survey of Midwest Department of Transportation current practices, implementing a health monitoring system on the bridge and approach slab, interpreting the data obtained during the evaluation, and conducting periodic visual inspections. Based on the information obtained from the testing the following general conclusions were made: The integral connection between the approach slabs and the bridges appear to function well with no observed distress at this location and no relative longitudinal movement measured between the two components; Tying the approach slab to the bridge appears to impact the bridge; The two different approach slabs, the longer precast slab and the shorter cast-in-place slab, appear to impact the bridge differently; The measured strains in the approach slabs indicate a force exists at the expansion joint and should be taken into consideration when designing both the approach slab and the bridge; The observed responses generally followed an annual cyclic and/or short term cyclic pattern over time.
• Format:
  PDF
• Collection(s):
  US Transportation Collection
• Main Document Checksum:
  urn:sha-512:80a73958b7111cd022fa9661fdb49823e4338bd43cef8032a68aa8d6d41b3505977ac6d64a9e88ebf01f4e77ce8e9cc8dd69a2d777c3e989b028894cf6a01eac
• Download URL:
  https://rosap.ntl.bts.gov/view/dot/24103/dot_24103_DS1.pdf
• File Type:
  [PDF - 9.71 MB ]