Rogge, D. F., Ifft, C., Hicks, R. G., & Scholl, L. G. (1988). Polymer modified asphalt in hot mix pavement : interim report, executive summary (Report No. FHWA-OR-RD-89-02). Oregon State University. Dept. of Civil, Construction, and Environmental Engineering. https://rosap.ntl.bts.gov/view/dot/22971
Rogge, David F., Charles Ifft, R. G. Hicks, and Lewis G. Scholl. Polymer modified asphalt in hot mix pavement : interim report, executive summary. Report no. FHWA-OR-RD-89-02. Oregon State University. Dept. of Civil, Construction, and Environmental Engineering, 1988. https://rosap.ntl.bts.gov/view/dot/22971.
Rogge, David F., et al. Polymer modified asphalt in hot mix pavement : interim report, executive summary. Oregon State University. Dept. of Civil, Construction, and Environmental Engineering, 1988, Report no. FHWA-OR-RD-89-02, ROSA P. https://rosap.ntl.bts.gov/view/dot/22971.
This report presents a summary of a literature review to determine the most appropriate testing procedures for use with polymer modified asphalts. In examining testing procedures, it was necessary to study the effects of polymer modifiers on both binder and mix properties. The four additives most closely examined are styrene-butadiene (SB), styrene-butadiene-styrene (SBS), styrene-butadiene-rubber (SBR), and ethlene-vinyl-acetate (EVA). It was found that standard binder and mixture testing procedures may be successfully used with polymer modified asphalts. In addition of which are force ductility, toughness and tenacity, rubber industry tensile tests and dynamic shear analysis. A testing program is proposed which will result in recommendations for a specification for polymer modified binders in hot mix. A definite lack of study of long-term aging effects for polymer modified asphalt mixes was noted. Available information indicates a potential problem in this area and that additional research should be conducted.
Rogge, D. F., Ifft, C., Hicks, R. G., & Scholl, L. G. (1988). Polymer modified asphalt in hot mix pavement : interim report, executive summary (Report No. FHWA-OR-RD-89-02). Oregon State University. Dept. of Civil, Construction, and Environmental Engineering. https://rosap.ntl.bts.gov/view/dot/22971
Rogge, David F., Charles Ifft, R. G. Hicks, and Lewis G. Scholl. Polymer modified asphalt in hot mix pavement : interim report, executive summary. Report no. FHWA-OR-RD-89-02. Oregon State University. Dept. of Civil, Construction, and Environmental Engineering, 1988. https://rosap.ntl.bts.gov/view/dot/22971.
Rogge, David F., et al. Polymer modified asphalt in hot mix pavement : interim report, executive summary. Oregon State University. Dept. of Civil, Construction, and Environmental Engineering, 1988, Report no. FHWA-OR-RD-89-02, ROSA P. https://rosap.ntl.bts.gov/view/dot/22971.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.