This study was initiated to determine the properties of concrete using three types of coarse aggregate. The coarse aggregates evaluated in this study included silicious gravel, the standard aggregate for concrete in the state, with sandstone and limestone as possible alternatives.The main objective of this study was to determine whether limestone and sandstone are suitable replacements for regular Class A gravel. The results indicated that both limestone and sandstone will provide a very suitable replacement for gravel. Improvements were also observed in durability and flexural strength when limestone and sandstone were used in the concrete. The addition of water reducing and super water reducing agents was also very beneficial in gaining high strength in all types of concrete evaluated. Due to the improved freeze-thaw resistance in gravel concrete when air entraining agents were used, it use is recommended in gravel concrete.
Over the past several years a comprehensive study on the pore systems of limestones used as coarse aggregate in portland cement concrete (PCC) and the...
Premature deterioration of concrete pavement due to D-cracking has been a problem in Kansas since the 1930s. Kansasgeology includes mineable limestone...
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.