The conventional approach to signal timing optimization and field deployment requires current traffic flow data, experience with optimization models, familiarity with the signal controller hardware, and knowledge of field operations including signal timing fine-tuning. Developing new signal timing parameters for efficient traffic flow is a time-consuming and expensive undertaking.
This report examines various cost-effective techniques that can be used to generate good signal timing plans that can be employed when there are insufficient financial resources to generate the plans using conventional techniques. The report identifies a general, eight-step process that leads to new signal plans: 1) Identify System Intersections; 2) Collect and Organize Existing Data; 3) Conduct a Site Survey; 4) Obtain Turning Movement Data; 5) Calculate Local Timing Parameters; 6) Identify Signal Groupings; 7) Calculate Coordination Parameters; and 8) Install and Evaluate New Plans. The report examines each of these steps and identifies procedures that can be used to minimize costs in each step. Special emphasis is placed on the costs of turning movement counts. The report develops a “tool box” of procedures and provides examples of how the tool box can be used when there is a moderate signal timing budget, when there is a modest signal timing budget, and when there is a minimum signal timing budget.
The report presents the details of a study carried out to test and implement a dilemma zone protection technique at three high-speed closely-spaced in...
The area close to a signalized intersection,called the dilemma zone, poses a high accidentpotential for the driver in stopping safely during theyellow...
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.