Toth, C. K., & Grejner-Brzezinska, D. A. (2006). Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report] (Report No. FHWA/OH-2006/5). Ohio State University. Center for Mapping. https://rosap.ntl.bts.gov/view/dot/5724
Toth, Charles K. and Dorota A. Grejner-Brzezinska. Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report]. Report no. FHWA/OH-2006/5. Ohio State University. Center for Mapping, 2006. https://rosap.ntl.bts.gov/view/dot/5724.
Toth, Charles K., and Dorota A. Grejner-Brzezinska Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report]. Ohio State University. Center for Mapping, 2006, Report no. FHWA/OH-2006/5, ROSA P. https://rosap.ntl.bts.gov/view/dot/5724.
LiDAR technology, introduced in the late 1990s, has received wide acceptance in airborne surveying as a leading tool for obtaining high-quality surface data at decimeter-level vertical accuracy in an unprecedentedly short turnaround time. State-of-the-art LiDAR systems can easily achieve 2-3 cm ranging accuracy, which is certainly the accuracy range required by engineering-scale mapping. However, this is also the accuracy range that cannot be realized by routine navigation-based direct sensor platform orientation. The main objective of the project was to achieve this accuracy as closely as possible and then introduce it into the daily operation of ODOT Office of Aerial Engineering. Several tests confirmed that by using LiDAR specific ground targets, engineering-scale mapping accuracy can be achieved in normal production. The final report presents surface modeling studies, sensor calibration developments, the concept and design of LiDAR specific ground targets; followed by performance validation results, based on test flights performed by the OAE staff and preliminary investigation of image fusion with LiDAR data.
Problem: State-of-the-art airborne mapping is in major transition, which affects both the data acquisition and data processing technologies. The IT ag
...
Toth, C. K., & Grejner-Brzezinska, D. A. (2006). Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report] (Report No. FHWA/OH-2006/5). Ohio State University. Center for Mapping. https://rosap.ntl.bts.gov/view/dot/5724
Toth, Charles K. and Dorota A. Grejner-Brzezinska. Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report]. Report no. FHWA/OH-2006/5. Ohio State University. Center for Mapping, 2006. https://rosap.ntl.bts.gov/view/dot/5724.
Toth, Charles K., and Dorota A. Grejner-Brzezinska Geo-Referenced Digital Data Acquisition and Processing System Using LiDAR Technology [Final Report]. Ohio State University. Center for Mapping, 2006, Report no. FHWA/OH-2006/5, ROSA P. https://rosap.ntl.bts.gov/view/dot/5724.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.