Woodson, W. E., & Selby, P. H. (1981). Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems (Report No. DOT-HS-805-982). United States. National Highway Traffic Safety Administration. https://doi.org/10.21949/1525075
Woodson, Wesley E. and P. H. Selby. Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems. Report no. DOT-HS-805-982. United States. National Highway Traffic Safety Administration, 1981. https://doi.org/10.21949/1525075.
Woodson, Wesley E., and P. H. Selby Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems. United States. National Highway Traffic Safety Administration, 1981, Report no. DOT-HS-805-982, ROSA P. https://doi.org/10.21949/1525075.
The purposes of this study were (1) to determine how much clearance between a seat belt and seat cushion is needed for a driver to enter the front seat of an automobile equipped with automatic seat belts---without his/her having to lift the webbing, and (2) to derive data regarding where driver prefer to--and therefore realistically would--position themselves with relation to the steering wheel and pedal controls. Based on subjects representative of the 5th, 50th and 95th percentile, a clearance envelope for acceptable ingress/egress clearance was determined and a compliance test procedure recommended. Using these same subjects, their preferred seating positions are essentially those for which they were designed, i.e., 5th percentile females position the seat as far forward as it will go; the general 50th percentile group place the seat about midway between fore and aft extremes, and the 95th percentile males almost invariably position the seat as far aft as it will go. /Abstract from report summary page/
Woodson, W. E., & Selby, P. H. (1981). Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems (Report No. DOT-HS-805-982). United States. National Highway Traffic Safety Administration. https://doi.org/10.21949/1525075
Woodson, Wesley E. and P. H. Selby. Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems. Report no. DOT-HS-805-982. United States. National Highway Traffic Safety Administration, 1981. https://doi.org/10.21949/1525075.
Woodson, Wesley E., and P. H. Selby Ingress Clearance Requirements and Seat Positioning for Automatic Belt Systems. United States. National Highway Traffic Safety Administration, 1981, Report no. DOT-HS-805-982, ROSA P. https://doi.org/10.21949/1525075.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.