FAA Advisories concern how to comply with airworthiness regulations. This collection was published from 1957 to 2000. The FAA Advisory Circular System was established for the publication of nonregulatory guidance and informational material to the public. Bookmark this collection: https://rosap.ntl.bts.gov/collection_faacirculars or https://doi.org/10.21949/1530829.
United States. Department of Transportation. Federal Aviation Administration
1977-08-15
|
PDF
This Advisory Circular provides guidelines concerning environmental conditions for instrument repair and overhaul shops and information regarding calibration of test equipment.
United States. Department of Transportation. Federal Aviation Administration
1983-11-19
|
PDF
This publication is prepared from information submitted by those of you who operate and maintain civil aeronautical products. The contents include items that have been reported to be significant, but which have not been evaluated fully by the time the material went to press. As additional facts such as cause and corrective action are identified, th
...
United States. Department of Transportation. Federal Aviation Administration
1979-09-05
|
PDF
This advisory circular provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft, aircraft engines, propellers and propeller blades and hubs.
United States. Department of Transportation. Federal Aviation Administration
1965-08-02
|
PDF
This Advisory Circular is to alert industry to the possibility of mismatching outputs, both guidance and flag alarm of certain VHF navigation receivers when used with some types of display indicators. With mismatching it is possible for the receiver to fail without providing a flag alarm. Improper guidance information obtained under this condition
...
United States. Department of Transportation. Federal Aviation Administration
1964-06-24
|
PDF
This circular is to advise the public that policy information contained in Civil Aeronautics Manual 18 sections 18.30-2 through 18.30-17 and 18.30-20 through 18.30-22 may be used after the effective date of Federal Aviation Regulation Part 43.
United States. Department of Transportation. Federal Aviation Administration
1967-06-06
|
PDF
This Advisory Circular contains acceptable methods for testing altimeters and static systems, It also provides general information concerning the test equipment used, and precautions to be taken, when performing such tests.
United States. Department of Transportation. Federal Aviation Administration
1979-06-20
|
PDF
This advisory circular contains acceptable methods for testing altimeters and static systems. It also provides general information concerning the test equipment used and precautions to be taken when performing such tests.
United States. Department of Transportation. Federal Aviation Administration
1973-01-12
|
PDF
This circular sets forth one means, but not the only means, of demonstrating compliance with the maintenance requirements, contained in FAR 91.177 and prescribed in FAR 43, Appendix F, governing the testing of ATC transponders.
United States. Department of Transportation. Federal Aviation Administration
1974-01-11
|
PDF
This circular sets forth one means, but not the only means, of demonstrating compliance with the maintenance requirements, contained in FAR 91.177 and prescribed in FAR 43, Appendix F (amended), governing the testing of ATC transponders.
United States. Department of Transportation. Federal Aviation Administration
1998-09-25
|
PDF
This Advisory Circular (AC) contains guidance (test methods, acceptance criteria, and process changes) for qualifying alternative chemical agents and/or processes used in repainting or general cleaning of aviation products. Like all AC material, this AC in itself is not mandatory, and does not constitute a regulation. It is issued to describe an ac
...
United States. Department of Transportation. Federal Aviation Administration
1965-09-10
|
PDF
This Advisory Circular sets forth guidance material which may be used to determine the adequacy of barometers used in the calibration of aircraft static instruments, It was also prepared to explain barometric accuracy requirements and to provide general information pertaining to altitude and atmospheric pressure measurement, It presents additional
...
United States. Department of Transportation. Federal Aviation Administration
1980-10-16
|
PDF
This advisory circular (AC) provides guidance material which may be used to determine the adequacy of barometers used in the calibration of aircraft static instruments. It explains barmetric accuracy requirements and provides general information pertaining to altitude and atmospheric pressure measurement.
United States. Department of Transportation. Federal Aviation Administration
1973-05-11
|
PDF
This Advisory Circular reviews the basic principles underlying nondestructive testing. The information contained herein implements data currently available. It is hoped that interested parties will be stimulated by this publication and seek additional information in more extensive works on nondestructive testing.
United States. Department of Transportation. Federal Aviation Administration
1974-10-08
|
PDF
This change to the advisory circular clarifies the discussion on the removal of corrosion and treatment of the corroded areas. Reports that have been received indicate that some operators have misinterpreted the procedure for removing corrosion.
United States. Department of Transportation. Federal Aviation Administration
1991-07-25
|
PDF
This advisory circular (AC) is a summary of current available data regarding identification and treatment of corrosive attack on aircraft structure and engine materials.
United States. Department of Transportation. Federal Aviation Administration
1974-08-13
|
PDF
The purposes of this Advisory Circular are to point out areas of misunderstanding regarding: a. Aircraft owners and operators' responsibility for complying with Airworthiness Directives. b. Maintenance personnel responsibilities with regards to performance of Airworthiness Directives. c. Maintenance record entries for AD's required by FAR 91.173(a)
...
United States. Department of Transportation. Federal Aviation Administration
1974-09-19
|
PDF
This circular provides information on the installation of encoding altimeters based upon recently acquired operating experience and on the maintenance of ATC transponders.
United States. Department of Transportation. Federal Aviation Administration
1977-11-11
|
PDF
This circular provides information concerning the installation of encoding altimeters based upon recently acquired operating experience and on the maintenance of ATC transponders.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.