Haider, S. W., Muslim, H. B., Khazanovich, L., Kutay, M. E., & Cetin, B. (2023). BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies (Report No. MN 2023-35). Minnesota. Department of Transportation. Office of Research & Innovation. https://rosap.ntl.bts.gov/view/dot/73145
Haider, Syed W., Hamad Bin Muslim, Lev Khazanovich, Muhammed Emin Kutay, and Bora Cetin. BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies. Report no. MN 2023-35. Minnesota. Department of Transportation. Office of Research & Innovation, 2023. https://rosap.ntl.bts.gov/view/dot/73145.
Haider, Syed W., et al. BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies. Minnesota. Department of Transportation. Office of Research & Innovation, 2023, Report no. MN 2023-35, ROSA P. https://rosap.ntl.bts.gov/view/dot/73145.
It is well-known that longitudinal joint construction quality is critical to flexible pavement life. The maintenance activities caused by longitudinal joint deterioration's direct or indirect effects and raveling problems along the centerline paving joint of asphalt roadways have become challenging for many highway agencies. A poorly constructed joint can lead to premature deterioration of an otherwise sound pavement. Thus, improving the joint’s construction can improve density and decrease permeability. It is probably the single most crucial remedy to enhance pavement performance. A density profiling system (DPS) provides continuous, instead of limited, coverage provided by conventional joint quality evaluation methods. Statistical, probabilistic, and percent-within-limits (PWL) analysis of DPS data suggests avoiding the construction of an unconfined joint. Tapered joints, confined butt joints employing the Maryland method or otherwise, echelon paved, and unconfined butt joints with cut back can produce adequate compaction at the joint.
This research summary pertains to Report 2023-35, "BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies," publis
...
Haider, S. W., Muslim, H. B., Khazanovich, L., Kutay, M. E., & Cetin, B. (2023). BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies (Report No. MN 2023-35). Minnesota. Department of Transportation. Office of Research & Innovation. https://rosap.ntl.bts.gov/view/dot/73145
Haider, Syed W., Hamad Bin Muslim, Lev Khazanovich, Muhammed Emin Kutay, and Bora Cetin. BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies. Report no. MN 2023-35. Minnesota. Department of Transportation. Office of Research & Innovation, 2023. https://rosap.ntl.bts.gov/view/dot/73145.
Haider, Syed W., et al. BMP For Issues with Asphalt Centerline Joint and Intelligent Compaction for Local Agencies. Minnesota. Department of Transportation. Office of Research & Innovation, 2023, Report no. MN 2023-35, ROSA P. https://rosap.ntl.bts.gov/view/dot/73145.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.