Senadheera, S., & Kobza, J. E. (2006). Further Development of Binder Quality Assurance Program [Project Summary] (Report No. 0-4681). Texas Department of Transportation. Research and Technology Implementation Office. https://rosap.ntl.bts.gov/view/dot/68559
Senadheera, Sanjaya and John E Kobza. Further Development of Binder Quality Assurance Program [Project Summary]. Report no. 0-4681. Texas Department of Transportation. Research and Technology Implementation Office, 2006. https://rosap.ntl.bts.gov/view/dot/68559.
Senadheera, Sanjaya, and John E Kobza Further Development of Binder Quality Assurance Program [Project Summary]. Texas Department of Transportation. Research and Technology Implementation Office, 2006, Report no. 0-4681, ROSA P. https://rosap.ntl.bts.gov/view/dot/68559.
The current Texas Department of Transportation (TxDOT) binder Quality Control/Quality Assurance (QC/QA) system uses two asphalt binder supplier categories: suppliers who have an approved quality control plan (QCP) on file with TxDOT and those who do not. Suppliers who maintain a current QCP can obtain approval to supply binders on either a monthly or a quantity basis, while for others, each load of asphalt must be tested for specification compliance. This binder QC/QA system has worked reasonably well until recently. A few binder supplier-grade combinations have experienced higher failure rates than in the past, and some TxDOT districts have had to resort to taking frequent field samples, as frequently as one per each transport load. Many TxDOT practitioners indicated that an approved binder source does not always provide acceptable quality binders. A more robust QC/QA system is needed to ensure a supply of binders that both meet specifications and maintain a consistent level of quality. This research project was launched to create a quality management system that utilizes the latest QC/QA principles by sharing the quality management burden between the supplier and the client TxDOT.
Senadheera, S., & Kobza, J. E. (2006). Further Development of Binder Quality Assurance Program [Project Summary] (Report No. 0-4681). Texas Department of Transportation. Research and Technology Implementation Office. https://rosap.ntl.bts.gov/view/dot/68559
Senadheera, Sanjaya and John E Kobza. Further Development of Binder Quality Assurance Program [Project Summary]. Report no. 0-4681. Texas Department of Transportation. Research and Technology Implementation Office, 2006. https://rosap.ntl.bts.gov/view/dot/68559.
Senadheera, Sanjaya, and John E Kobza Further Development of Binder Quality Assurance Program [Project Summary]. Texas Department of Transportation. Research and Technology Implementation Office, 2006, Report no. 0-4681, ROSA P. https://rosap.ntl.bts.gov/view/dot/68559.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.