McGrath, T. J., Tigue, D., Rund, R., & Heger, T. (1989). BOXCAR User and Programmer Manual, Version 1.0 (Report No. FHWA-IP-89-018). United States. Department of Transportation. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/67969
McGrath, Timothy J., D.B. Tigue, R.E. Rund, and T.G. Heger. BOXCAR User and Programmer Manual, Version 1.0. Report no. FHWA-IP-89-018. United States. Department of Transportation. Federal Highway Administration, 1989. https://rosap.ntl.bts.gov/view/dot/67969.
McGrath, Timothy J., et al. BOXCAR User and Programmer Manual, Version 1.0. United States. Department of Transportation. Federal Highway Administration, 1989, Report no. FHWA-IP-89-018, ROSA P. https://rosap.ntl.bts.gov/view/dot/67969.
This Manual presents an overview, user instructions and technical backup for the computer program BOXCAR. BOXCAR is a program for the structural analysis and design of reinforced concrete box sections. It has been written to run on IBM or IBM compatible microcomputers. The input routines are user friendly; only minimal experience with computers is required prior to use. Most parameters can be controlled by the user. Knowledge of structural design codes for culverts is required. BOXCAR completes structural analysis for loads due to box weight, soil weight, internal gravity fluid weight, live loads and user specified surcharge loads. Forces resulting from each load condition may be printed out separately. Structural design is in accordance with AASHTO. Design criteria include ultimate flexure, diagonal tension, service load crack control, and service load fatigue. The quantity of output is controlled by the user. All output is formatted for 8.5 by 11 inch paper. User instructions include descriptions of all input variables and design examples. The programmer manual includes listings of all technical subroutines.
McGrath, T. J., Tigue, D., Rund, R., & Heger, T. (1989). BOXCAR User and Programmer Manual, Version 1.0 (Report No. FHWA-IP-89-018). United States. Department of Transportation. Federal Highway Administration. https://rosap.ntl.bts.gov/view/dot/67969
McGrath, Timothy J., D.B. Tigue, R.E. Rund, and T.G. Heger. BOXCAR User and Programmer Manual, Version 1.0. Report no. FHWA-IP-89-018. United States. Department of Transportation. Federal Highway Administration, 1989. https://rosap.ntl.bts.gov/view/dot/67969.
McGrath, Timothy J., et al. BOXCAR User and Programmer Manual, Version 1.0. United States. Department of Transportation. Federal Highway Administration, 1989, Report no. FHWA-IP-89-018, ROSA P. https://rosap.ntl.bts.gov/view/dot/67969.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.