Gerardi, T., & Gerardi, M. (2023). Method to Identify and Quantify Multiple-Event Roughness (Report No. DOT/FAA/TC-23/09). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://doi.org/10.21949/1528203
Gerardi, Tony and Michael Gerardi. Method to Identify and Quantify Multiple-Event Roughness. Report no. DOT/FAA/TC-23/09. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 2023. https://doi.org/10.21949/1528203.
Gerardi, Tony, and Michael Gerardi Method to Identify and Quantify Multiple-Event Roughness. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 2023, Report no. DOT/FAA/TC-23/09, ROSA P. https://doi.org/10.21949/1528203.
FAA Advisory Circular (AC) 150/5380-9 “provides guidelines and procedures for measuring and evaluating runway roughness as identified by surface profile data of rigid and flexible airport pavements. The guidance in this AC provides technical procedures to quantify surface irregularities and to determine how surface irregularities may affect specific categories of airplanes.” The AC was a first step towards defining and implementing basic pavement roughness criteria for airfield pavements. The criteria presented in this early version was for single-event bump roughness. It was recognized that there was a technical need to address harmonics or multiple-bump event roughness. The research results contained in the report are in response to that technical need. A method has been developed that locates and quantifies multiple-event roughness using measured profile data only. The method works for taxiways as well as runways. In addition, a “screening” process was developed to quickly categorize pavements as acceptable, excessive, or unacceptable. Excessive or unacceptable pavement sections can then be evaluated for potential corrective action.
Gerardi, T., & Gerardi, M. (2023). Method to Identify and Quantify Multiple-Event Roughness (Report No. DOT/FAA/TC-23/09). United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center. https://doi.org/10.21949/1528203
Gerardi, Tony and Michael Gerardi. Method to Identify and Quantify Multiple-Event Roughness. Report no. DOT/FAA/TC-23/09. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 2023. https://doi.org/10.21949/1528203.
Gerardi, Tony, and Michael Gerardi Method to Identify and Quantify Multiple-Event Roughness. United States. Department of Transportation. Federal Aviation Administration. William J. Hughes Technical Center, 2023, Report no. DOT/FAA/TC-23/09, ROSA P. https://doi.org/10.21949/1528203.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.