Improving Fatigue Strength of Polymer Concrete using Nanomaterialswith Field Implementation
-
2018-10-16
Details:
-
Creators:
-
Corporate Creators:
-
Corporate Contributors:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Edition:Final Report April 2015 – October 2018
-
Corporate Publisher:
-
Abstract:Polymer concrete (PC) is that type of concrete where the cement binder is replaced with polymer. PC is often used to improve friction and protect structural substrates in reinforced concrete and orthotropic steel bridges. However, its low fatigue performance, limited fracture toughness and tendency to debond pose expensive maintenance challenges for highway bridges. This research investigated the use of nanomaterials such as multi-walled carbon nanotubes (MWCNTs) and alumina nanoparticles (ANPs) to produce PC with superior bond strength, fracture toughness and fatigue strength. A total of 20 different PC mixes were containing up to 3.0 wt.% content of nanomaterial were developed and examined. Mechanical characterization methods including compressive, flexural, bond and tensile strengths, ductility (strain at failure), toughness, fracture toughness and fatigue were conducted. Finite element modeling was also utilized to understand the shear stresses in PC-steel interface. Microstructural analysis revealed the chemical effects of incorporating nanomaterials in PC. The results show improvements in all mechanical performances of PC reaching 170% in fracture toughness, 1200% in fatigue life, 135% in ductility with a decrease in tensile and compressive strengths by about 15%. Furthermore, experimental work showed the ability to use pristine MWCNTs to self-monitor PC under static and cyclic loads. Finally, field implementation of PC with nanomaterials showed the ability to perform self-monitoring of PC under standard traffic loading. Field implementation is included.
-
Format:
-
Funding:
-
Collection(s):
-
Main Document Checksum:
-
Download URL:
-
File Type: