Walubita, L. F., Nyamuhokya, T., & Lee, S. I. (2019). Test Specifications for SPST and HWTT (Report No. 5-6744-01-P1). Texas A&M Transportation Institute. https://rosap.ntl.bts.gov/view/dot/59098
Walubita, Lubinda F., Tito Nyamuhokya, and Sang Ick Lee. Test Specifications for SPST and HWTT. Report no. 5-6744-01-P1. Texas A&M Transportation Institute, 2019. https://rosap.ntl.bts.gov/view/dot/59098.
Walubita, Lubinda F., et al. Test Specifications for SPST and HWTT. Texas A&M Transportation Institute, 2019, Report no. 5-6744-01-P1, ROSA P. https://rosap.ntl.bts.gov/view/dot/59098.
This document is divided into two major parts: Part A and B. Part A documents some proposed modifications to the Hamburg wheel-tracking test (HWTT) and Tex 242-F test procedure, whereas Part B documents the proposed tentative specification and test procedures for the simple punching shear test (SPST). For Part A (HWTT specification), the major modification is in Section 6.5 where the procedure to handle mixtures at higher HWTT test temperatures is described. TxDOT Project 5-6744-01 found most hot mix asphalt (HMA) mixtures fail rapidly when subjected to higher HWTT temperatures (60°C). Nevertheless, those that survive require a closer look onto the response rutting plots and determination if adjustments are needed as explained in Section 6.5. Part B is a tentative proposed draft specification for SPST testing. The major output of this SPST protocol are HMA shear strength, shear strain, shear modulus, shear strain energy, and shear strain energy index. Of all these SPST parameters, only shear strength and shear strain energy index were found to have a good correlation with field rutting and HWTT testing (1, 2, 3).
Walubita, L. F., Nyamuhokya, T., & Lee, S. I. (2019). Test Specifications for SPST and HWTT (Report No. 5-6744-01-P1). Texas A&M Transportation Institute. https://rosap.ntl.bts.gov/view/dot/59098
Walubita, Lubinda F., Tito Nyamuhokya, and Sang Ick Lee. Test Specifications for SPST and HWTT. Report no. 5-6744-01-P1. Texas A&M Transportation Institute, 2019. https://rosap.ntl.bts.gov/view/dot/59098.
Walubita, Lubinda F., et al. Test Specifications for SPST and HWTT. Texas A&M Transportation Institute, 2019, Report no. 5-6744-01-P1, ROSA P. https://rosap.ntl.bts.gov/view/dot/59098.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.