United States Department of Transportation
About
[PDF-2.21 MB]
Details:
-
Creators:
-
Corporate Creators:
-
Corporate Contributors:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Corporate Publisher:
-
Abstract:Currently, there are over 3.96 million public centerline road miles in the U.S. and of this, 2.50 million miles (or about 63 percent) are paved (FHWA, 2002). Pavement deterioration is a significant problem that must be addressed to preserve highway infrastructure investments in highways in United State and around the world. Accurately evaluating condition of pavement and sub-pavement soil/rock over time and using this information to choose appropriate maintenance techniques is critical in terms of the responsible maintenance of roadways. In order to demonstrate the utility and cost-effectiveness of using geophysical tools to assess roadway and sub-roadway conditions, I propose to acquire geophysical control along total of eight segments of roadway in central Missouri (Figure 1) to assess the condition of pavement, base and native soil all the way down to the top of bedrock. Each segment of road way will be approximately 1000 ft. long. Geophysical data will be acquired at these different locations using; Electrical Resistivity Tomography, Multi-Channel Analysis of Surface Wave, Ground Penetrating Radar using both 1.5 GHz and 400 MHz, Portable Seismic Property Analyzer and Ohm Mapper methods. Core control (surface to native soil) and falling weight deflect meter control will be acquired along the test segments in order to constrain the interpretation of the acquired geophysical data. Data will be collected under different weather conditions (wet, dry, warm and cold) to assess the impact of these climatic conditions on the data quality and interpretability. The test sites will be selected so, data will be acquired in different geological environments and with very different pavement condition (including asphalt over concrete, asphalt reinforces concrete, thick asphalt, thin asphalt, good asphalt and poor asphalt). The reason of using these geophysical techniques is because the utility and cost-effectiveness of these techniques has not been demonstrated yet because they are not routinely applied to the investigation of roadways and the use of these geophysical techniques could result in decreased cost and time and increased safety. The tools to be tested will generate reliable information about pavement thickness, pavement/base/sub-grade elastic moduli, base and sub-grade moisture content, base thickness, sub-grade clay content, depth to top of rock. Information can also be generated about the thickness, elastic moduli, clay content and moisture content of the soil. A secondary objective is to assess the accuracy of the interpretations and the various factors that affect the reliability of the interpretations
-
Format:
-
Funding:
-
Collection(s):
-
Main Document Checksum:
-
File Type:
Supporting Files
-
No Additional Files
More +
