Portable weigh-in-motion for pavement design - phases 1 and 2.
-
2014-10-01
Details:
-
Creators:
-
Corporate Creators:
-
Corporate Contributors:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Corporate Publisher:
-
Abstract:Keeping Oklahoma’s roadways, highways, and bridges in good condition is necessary to our
state’s safety and to avoid expenditures in billions of dollars each year for road repairs and
replacement. According to a study done by state of Oregon in 2009, heavy vehicles account for
79% (or $60 million) of annual expenditures required for roadway repaving. Likewise, they were
also responsible for 66.8% (or $27 million) of pavement and shoulder reconstruction; 65.1% (or
$145 million) of pavement and shoulder rehabilitations; and 61.5% (or $140 million) of pavement
maintenance. To weigh traveling trucks, the state of Oklahoma has installed 20 permanent
Weigh-in-Motion (WIM) sites. Expanding site coverage to include additional roadways and
highways improves data accuracy; however, it requires significant roadside construction and
costly infrastructure support. This report presents deployment results of a novel portable WIM
system and compares captured data with that collected at a nearby permanent WIM system.
Design, development, and road-installation details of the heavy-vehicle centric, portable WIM
system are also provided. Outcomes demonstrate that the portable system maintains data
quality but for short intervals and provides a viable alternative to permanent systems at merely
10 percent of the cost. The portable WIM system uses off-the-shelf components and
commercially available WIM controllers. The WIM controller used was IRD iSINC Lite.
The fabricated portable system could be promoted as an alternative WIM monitoring solution to
permanent WIM systems and/or static scale stations, both of which are extremely expensive to
install on highways. The portable WIM uses RoadTrax BL piezoelectric class-1 sensors,
galvanized metal fixtures equipped with pocket tapes to house the sensors, and a trailer with
cabinet to house WIM electronics, batteries, and REECE device for real-time monitoring. The
system is solar powered with three 100-Watt panels, and it costs roughly $20,000.
-
Format:
-
Funding:
-
Collection(s):
-
Main Document Checksum:
-
Download URL:
-
File Type: