Testa, D. M., & Hossain, M. (2014). Kansas Department of Transportation 2014 chip seal manual (Report No. K-TRAN: KSU-09-8). Kansas. Dept. of Transportation. Bureau of Materials & Research. https://rosap.ntl.bts.gov/view/dot/27232
Testa, Dean M. and Mustaque Hossain. Kansas Department of Transportation 2014 chip seal manual. Report no. K-TRAN: KSU-09-8. Kansas. Dept. of Transportation. Bureau of Materials & Research, 2014. https://rosap.ntl.bts.gov/view/dot/27232.
Testa, Dean M., and Mustaque Hossain Kansas Department of Transportation 2014 chip seal manual. Kansas. Dept. of Transportation. Bureau of Materials & Research, 2014, Report no. K-TRAN: KSU-09-8, ROSA P. https://rosap.ntl.bts.gov/view/dot/27232.
A chip seal is a very effective thin surface treatment process used by maintenance managers to
;
preserve existing asphalt pavements. The Kansas Department of Transportation (KDOT) 2014 Chip Seal
;
Manual is a guide that provides guidelines, background and general information for the design, construction,
;
and inspection of chip seals. This manual is intended for use by KDOT field engineers, laboratory personnel,
;
construction inspectors, and contractor’s estimators, supervisors, operators, and workers to provide
;
procedures for the design of chip seals. The information, recommendations and best practices provided in
;
this manual may refer to either: (1) learning the overall chip seal operation; (2) learning about the workings,
;
maintenance, calibration and proper operation of equipment used in chip sealing; or (3) learning chip seal
;
design procedures.
;
This manual consists of seven chapters. Chapter 1 is the introduction. Chapter 2 is about selection of
;
chip seal. Chapter 3 discusses the materials for chip seal and the design process. Chapter 4 discusses surface
;
preparation prior to chip sealing. Chapter 5 describes equipment inspection and calibration. Chapter 6
;
discusses the actual application process. Chapter 7 underlines the areas of concern during construction
;
process.
Testa, D. M., & Hossain, M. (2014). Kansas Department of Transportation 2014 chip seal manual (Report No. K-TRAN: KSU-09-8). Kansas. Dept. of Transportation. Bureau of Materials & Research. https://rosap.ntl.bts.gov/view/dot/27232
Testa, Dean M. and Mustaque Hossain. Kansas Department of Transportation 2014 chip seal manual. Report no. K-TRAN: KSU-09-8. Kansas. Dept. of Transportation. Bureau of Materials & Research, 2014. https://rosap.ntl.bts.gov/view/dot/27232.
Testa, Dean M., and Mustaque Hossain Kansas Department of Transportation 2014 chip seal manual. Kansas. Dept. of Transportation. Bureau of Materials & Research, 2014, Report no. K-TRAN: KSU-09-8, ROSA P. https://rosap.ntl.bts.gov/view/dot/27232.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.