Ahlborn, T. M., Gilbertson, C. G., Kiefer, J. A., & Colling, T. K. (2013). Assessment of ODOT culvert load rating spreadsheets for use in Michigan (Report No. RC-1590). Michigan Technological University. Transportation Institute. https://rosap.ntl.bts.gov/view/dot/27094
Ahlborn, Theresa M., Christopher G. Gilbertson, John A. Kiefer, and Timothy K. Colling. Assessment of ODOT culvert load rating spreadsheets for use in Michigan. Report no. RC-1590. Michigan Technological University. Transportation Institute, 2013. https://rosap.ntl.bts.gov/view/dot/27094.
Ahlborn, Theresa M., et al. Assessment of ODOT culvert load rating spreadsheets for use in Michigan. Michigan Technological University. Transportation Institute, 2013, Report no. RC-1590, ROSA P. https://rosap.ntl.bts.gov/view/dot/27094.
The project “Assessment of ODOT Culvert Load Rating Spreadsheets for use in Michigan” was
;
a short time-frame project funded by the Michigan Department of Transportation (MDOT)
;
through the Center for Structural Durability (CSD) at Michigan Tech. The objective of the
;
project was to assess existing spreadsheets developed by the Ohio Department of Transportation
;
(ODOT) for performing load rating calculations on corrugated metal pipe culverts using both
;
Load Factor Rating (LFR) and Load and Resistance Factor Rating (LRFR) methods. The
;
spreadsheets were assessed for their adherence to reference guides and then modified as required
;
to function with Michigan legal and overload truck descriptions. The project did not investigate
;
the suitability of the technical process used in the ODOT spreadsheets to produce reasonable
;
load rating calculations. Significant structural and programing changes to the spreadsheets were
;
considered outside the project scope. Details on the work performed for this project are
;
described in the following sections of the report.
Ahlborn, T. M., Gilbertson, C. G., Kiefer, J. A., & Colling, T. K. (2013). Assessment of ODOT culvert load rating spreadsheets for use in Michigan (Report No. RC-1590). Michigan Technological University. Transportation Institute. https://rosap.ntl.bts.gov/view/dot/27094
Ahlborn, Theresa M., Christopher G. Gilbertson, John A. Kiefer, and Timothy K. Colling. Assessment of ODOT culvert load rating spreadsheets for use in Michigan. Report no. RC-1590. Michigan Technological University. Transportation Institute, 2013. https://rosap.ntl.bts.gov/view/dot/27094.
Ahlborn, Theresa M., et al. Assessment of ODOT culvert load rating spreadsheets for use in Michigan. Michigan Technological University. Transportation Institute, 2013, Report no. RC-1590, ROSA P. https://rosap.ntl.bts.gov/view/dot/27094.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.